Glass Clamp - Glass Adapter

Glass Clamp - Glass Adapter


Sale price $22.99
Shipping calculated at checkout.

Only 6500 items in stock!

ANSI 316 Stainless Steel Glass Adapter connects a glass panel to a wall with a simple, modern, and floating look. This adapter is designed to work with 1/4", 3/8", 1/2", 5/8" or 3/4" glass thickness.


These instructions will provide step-by-step installation guidelines for installing the Glass Adapter.  The Glass adapter comes with 2 round rubber gaskets, standoff column (30/40 mm), and the mounting sleeve (you will need to purchase the connection screw separately).

Glass Adapter should be installed with a maximum distance of every 4 feet.

Caution:  Wear protective ANSI approved safety glasses, working gloves and mask at all times 

Tools Required

  1. Drilling tool to go into wood/concrete
  2. 1/4” drill bit
  3. Holes require on glass is 1” in diameter. 


  1. When using a 3/8” lag screw, spot drill using 1/4” drill bit, different mounting surfaces require different methods.
  2. Begin with only the mounting sleeve with the appropriate screw
  3. Twist the standoff column (#3) on to the sleeve. 
  4. Insert the gasket #4, place the glass in place, then gasket #5, and then place cap #6 and screw in over the glass . The hole size on the glass is 1” diameter. 


 Download PDF Instructions

NOTE: A small amount of surface corrosion is not uncommon after some exposure to weather or salty conditions; we recommend using our passivation solution or a stainless steel polish to prevent surface corrosion; more information available on our Engineering Specs Page