Glass Railing - Chicago Square - Surface Mount - Stair Lower Post - No Handrail
SQU.STR.GLS.LOW
Regular price $265.00 Sale price $221.00 Save $44.00
Shipping calculated at checkout.
ANSI 316 Glass Railing Systems Square Stair Lower Post with Square Glass Clamps is a part of our Chicago Square Style Glass Railing System. Made from ANSI 316 Stainless Steel the post measured 1.57"x1.57" gauge 10 tubing. This version is designed for a top rail.
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Stainless Steel Railing - Chicago Square - Stair Mid Post with Square Glass Clamps is a part of our Chicago Square style glass railing system. This system comes either with or without a handrail bracket
What is included in the kit?
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 4 Square Glass Clamps
Details:
Links & Downloadable materials:
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
*Glass must be provided by a local vendor *
Glass Railing - Chicago Square - Surface Mount - Stair MID Post - Handrail
SQU.STR.GLS.MID
Regular price $265.00
Shipping calculated at checkout.
ANSI 316 Glass Railing Systems Square Stair MID Post with Square Glass Clamps is a part of our Chicago Square Style Glass Railing System. Made from ANSI 316 Stainless Steel the post measured 1.57"x1.57" gauge 10 tubing. This version is designed for a top rail.
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Stainless Steel Railing - Chicago Square - Stair Mid Post with Square Glass Clamps is a part of our Chicago Square style glass railing system. This system comes either with or without a handrail bracket
What is included in the kit?
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 4 Square Glass Clamps
Details:
Links & Downloadable materials:
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
*Glass must be provided by a local vendor *
Glass Railing - Chicago Square - Surface Mount - Stair MID Post - No Handrail
SQU.STR.GLS.MID.CAP
Regular price $265.00
Shipping calculated at checkout.
ANSI 316 Glass Railing Systems Square Stair MID Post with Square Glass Clamps is a part of our Chicago Square Style Glass Railing System. Made from ANSI 316 Stainless Steel the post measured 1.57"x1.57" gauge 10 tubing. This version is designed for a top rail.
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Stainless Steel Railing - Chicago Square - Stair Mid Post with Square Glass Clamps is a part of our Chicago Square style glass railing system. This system comes either with or without a handrail bracket
What is included in the kit?
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 4 Square Glass Clamps
Details:
Links & Downloadable materials:
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
*Glass must be provided by a local vendor *
Glass Railing - Chicago Square - Surface Mount - Stair Upper Post - No Handrail
SQU.STR.GLS.UPP.CAP
Regular price $265.00 Sale price $221.00 Save $44.00
Shipping calculated at checkout.
ANSI 316 Glass Railing Systems Square Stair Lower Post with Square Glass Clamps is a part of our Chicago Square Style Glass Railing System. Made from ANSI 316 Stainless Steel the post measured 1.57"x1.57" gauge 10 tubing. This version is designed for a top rail.
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
Glass Railing - Virginia Round - Fascia Mount - Stair Upper post - Handrail
Regular price $314.00
Shipping calculated at checkout.
ANSI 316 Glass Railing Systems Square Stairs Lower Post with Square Glass Clamps is a part of our Chicago Square Style Glass Railing System. Made from ANSI 316 Stainless Steel the post is 1.57"x1.57" with a thickness of 0.124". This version is designed without a top rail.
**This post requires custom work**
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Stainless Steel Railing - Chicago Square - End Post with Square Glass Clamps is a part of our Chicago Square style glass railing system. This system comes either with or without a handrail bracket
What is included in the kit?
- Post: Pre drilled and tapped (M8 x 1.25mm)
- (2) round Glass Clamps
- (1) Base Cover
Details:
Links & Downloadable materials:
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
*Glass must be provided by a local vendor *
Glass Railing - Virginia Round - Fascia Mount - Stair Upper Post- Handrail
FRND.STR.GLS.UPP
Regular price $270.00
Shipping calculated at checkout.
ANSI 316 Glass Railing Systems Round Stairs Upper Post with round Glass Clamps is a part of our Virginia Round Style Glass Railing System. Made from ANSI 316 Stainless Steel the post has a diameter of 1.625 gauge 10 tubing. This version is designed for a top rail.
**This post requires custom work**
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Stainless Steel Railing Systems Virginia Round End Post with Round Glass Clamps is a part of our Virginia Round style glass railing system. This system comes either with our without a handrail bracket
What is included in the kit?
- (1) Post: Pre drilled and tapped (M8 x 1.25mm)
- (2) Round Glass Clamps
- (1) Fascia Mounting Plate
Details:
Links & Downloadable materials:
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
*Glass must be provided by a local vendor *
Glass Railing - Virginia Round - Pivot Mount - Stair Lower Post - Handrail
GRND.PVT.STR.LOW
Regular price $240.00
Shipping calculated at checkout.
ANSI 316 Glass Railing Systems Round Stairs Mid Post with Round Glass Clamps is a part of our Virginia Round Style Glass Railing System. Made from ANSI 316 Stainless Steel the post has a diameter of 1.625 gauge 10 tubing. This version is designed for a top rail.
**This post requires custom work**
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Stainless Steel Railing Systems Virginia Round Pivot Mount Posts with Round Glass Clamps is a part of our Virginia Round style glass railing system. This system comes either with our without a handrail bracket
What is included in the kit?
GRND.PVT.STR.LOW - Lower Stair Post
- (1) Post: Pre drilled and tapped (M8 x 1.25mm)
- (2) Round Glass Clamps
GRND.PVT.STR.MID - Mid Stair Post
- (1) Post: Pre drilled and tapped (M8 x 1.25mm)
- (4) Round Glass Clamps
GRND.PVT.STR.UPP - Upper Stair Post
- (1) Post: Pre drilled and tapped (M8 x 1.25mm)
- (2) Round Glass Clamps
Details:
Links & Downloadable materials:
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
*Glass must be provided by a local vendor *
Overview
Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
This document shows anchoring options into different surface mount options. Please use this document for guidance only.
Customers are responsible to complying with their local building codes and/or architects guidelines therefore Inline Design shall, in no way be liable for any incidental or consequential damages caused. Please refer to our complete terms of sales for further information https://inlinedesign.us/terms_of_sale
Floor/Surface Mounting Flange
Floor/Surface Mount Anchoring into Concrete and Wood
Glass Railing - Virginia Round - Surface Mount - Blank Post
TRND.GC.42.G12.CUS
Regular price $114.00
Shipping calculated at checkout.
Glass Railing - Surface Mount - Blank Post - A part of our Virginia Round Style Glass Railing System. Made from ANSI 316 Stainless Steel the post has made from tubing with a diameter of 1.625 with a gauge of 10 or 12. This version does not come with an end cap or cone bracket to top off the post.
Overview
Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
This document shows anchoring options into different surface mount options. Please use this document for guidance only.
Customers are responsible to complying with their local building codes and/or architects guidelines therefore Inline Design shall, in no way be liable for any incidental or consequential damages caused. Please refer to our complete terms of sales for further information https://inlinedesign.us/terms_of_sale
Floor/Surface Mounting Flange
Floor/Surface Mount Anchoring into Concrete and Wood
Glass Railing - Virginia Round- Fascia Mount - Stair Lower Post - Handrail
FRND.STR.GLS.LOW
Regular price $270.00
Shipping calculated at checkout.
Glass Railing Systems Round Lower Stair Post with Round Glass Clamps is a part of our Virginia Round Style Glass Railing System. Made from ANSI 316 Stainless Steel the post has made from diameter of 1.625 gauge 10 ANSI 316 tubing". This version is designed with top rail.
**This post requires custom work**
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Stainless Steel Railing Systems Virginia Round Mid Post with Round Glass Clamps positioned 180º. This is is a part of our Virginia Round Family of glass railing systems. This system comes either with or without a handrail bracket.
What is included in the kit?
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 4 round Glass Clamps
- Base Cover
Details:
Links & Downloadable materials:
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
*Glass must be provided by a local vendor *
Handrail Bracket - Adjustable Square Stem
HBSA.040.014
Regular price $24.00
Shipping calculated at checkout.
Made of ANSI 316 Stainless steel this Handrail Bracket designed to fit our square post measuring 1.57" x 1.57". It adds 3" to the height to the post.
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Stainless Steel Handrail Bracket - Adjustable Square Stem- Designed to support a Flat Bottom handrail. Sleek in design, easy to install and is sturdy upon completion.
Recommended for use in indoor and outdoor locations, the ANSI 316 stainless steel handrail bracket provides a secure platform for railings. Suitable for compliance with ADA requirements.
This corrosion-resistant product can be installed on handrail tubing/top rails (wood or steel). ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
What is included in the kit?
- (1) Handrail Bracket - HBS.040.014
- (2) M5 x 0.8mm x 12mm Pan-Head Screw
Details:
- Designed to work with our Square Post Family
- Adds 3" to post measurement
- Supports ADA requirements
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- Dimensional Drawing
- Installation
- Drill & Tap Guidance
Applications:
Support for railings, railing system components, marine locations, docks, beach fronts, residential spaces, outdoor locations, public walkways, pathways, stairways, commercial sites, schools, urban locations, safety barriers, offices, etc.
Handrail Bracket - Event Horizon
HBWA.016
Regular price $28.00 Sale price $19.60 Save $8.40
Shipping calculated at checkout.
The Event Horizon Stainless Steel Handrail Bracket is a stylish railing component with futuristic elements. Recommended for use in indoor and outdoor locations, the AISI 316 stainless steel handrail bracket provides a secure platform for square or tube railings. Suitable for compliance with ADA requirements, a curved design with three circular openings can be found on the surface of the unit.
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Event Horizon Stainless Steel Handrail Bracket is a stylish railing component with futuristic elements. Recommended for use in indoor and outdoor locations, the ANSI 316 stainless steel handrail bracket provides a secure platform for square or tube railings. Suitable for compliance with ADA requirements, a curved design with three circular openings can be found on the surface of the unit.
This corrosion-resistant product can be installed on handrail tubing/top rails (wood or steel). Mounting to flat surfaces is facilitated by two openings on the circular mounting plate and two M5 screws (included). Railing components are secured on the platform of the bracket via two mounting holes. ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
What is included in the kit?
- (1) Handrail Bracket - HBWA.016
- (2) M5 x 0.8mm x 12mm Pan-Head Screw
- (1) Round Saddle Adapter
Details:
Links & Downloadable materials:
Applications:
Support for railings, railing system components, marine locations, docks, beach fronts, residential spaces, outdoor locations, public walkways, pathways, stairways, commercial sites, schools, urban locations, safety barriers, offices, etc.
Overview
These instructions will provide step-by-step installation guidelines for installing the Stainless Steel
Handrail Wall Bracket Event Horizon, HBWA.016 into sheetrock, wood, or drywall surfaces
This bracket comes with a round saddle adapter to attach to round tubing and 2x M5 screws to attach to a handrail
Caution: Wear protective ANSI approved safety glasses, working gloves and breathing mask all the times.
Tools Required
- Stud-finder
- Handheld drill
- 3/16” drill bit
- [Not Provided] 1x 3/8” mounting wall screw or bolt
Parts List:
Installation
- Using a stud-finder, locate a stud and spot drill using 1/8” drill bit (true for wood or steel/metal stud)
- Lift and tape flange base cover to expose the 1/4” screws on wall flange;
- Position bracket at desired orientation; use selected wall mounting screws (not provided) to secure the bracket to the mounting surface
Note: If using a round handrail, position the round saddle adapter on top of the flat saddle before attaching handrails.
NOTE: If the bracket doesn’t align properly you can pound it out using a 1” rod from the bottom of the post. Be careful not to hit any of the tube threading while inserting the rod. Do this over a piece of cloth so that they bracket does not get scratched when it is pounded out.
Downloads:
TIP SHEET - INSTALLING STAINLESS STEEL HANDRAILS
NOTE: A small amount of surface corrosion is not uncommon after some exposure to weather or salty conditions; we recommend using our passivation solution or a stainless steel polish to prevent surface corrosion; more information available on our Engineering Specification Page
Handrail Bracket - Gamma Quasar
HBWA.013.LAG
Regular price $39.00
Shipping calculated at checkout.
The Gamma Handrail Wall Bracket is part of our new Quasar collection. It is sleek and modern in design. It benefits from our new proprietary interchangeable mounting mechanism which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass.
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Gamma Handrail Bracket is part of our new Quasar collection. It is sleek and modern in design. It benefits from our new proprietary interchangeable mounting mechanism which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass. Suitable for round or square/rectangular handrail tubing.
Recommended for use in indoor and outdoor locations, the ANSI 316 stainless steel handrail bracket provides a secure platform for railings. Suitable for compliance with ADA requirements.
This corrosion-resistant product can be installed on handrail tubing/top rails (wood or steel). Mounting to flat surfaces is facilitated by two openings on the circular mounting plate and two M5 screws (included). Railing components are secured on the platform of the bracket via two mounting holes. ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
What is included in the kit?
- (1) Handrail Bracket - HBWA.013
- (2) M5 x 0.8mm x 12mm Pan-Head Screw
- (1) Round Saddle Adapter
- (1) Hanger Bolt
Details:
- Supports ADA requirements
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
- Bracket (U.S. Design Patent No.D781,688)
- Mounting (U.S Design Publication No. 2016/0377221)
Links & Downloadable materials:
Applications:
Support for railings, railing system components, marine locations, docks, beach fronts, residential spaces, outdoor locations, public walkways, pathways, stairways, commercial sites, schools, urban locations, safety barriers, offices, etc.
Handrail Bracket - Luminous Quasar
HBWA.011.LAG
Regular price $39.00
Shipping calculated at checkout.
The Luminous Handrail Wall Bracket is part of our new Quasar collection (U.S. Design Patent No. D787,302). It is sleek and modern in design. It benefits from our new proprietary interchangeable mounting mechanism (U.S Design Publication No. 2016/0377221) which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass. Suitable for round or square/rectangular handrail tubing
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Luminous Handrail Bracket is part of our new Quasar collection. It is sleek and modern in design. It benefits from our new proprietary interchangeable mounting mechanism which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass. Suitable for round or square/rectangular handrail tubing.
Recommended for use in indoor and outdoor locations, the ANSI 316 stainless steel handrail bracket provides a secure platform for railings. Suitable for compliance with ADA requirements.
This corrosion-resistant product can be installed on handrail tubing/top rails (wood or steel). Mounting to flat surfaces is facilitated by two openings on the circular mounting plate and two M5 screws (included). Railing components are secured on the platform of the bracket via two mounting holes. ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
What is included in the kit?
- (1) Handrail Bracket - HBWA.013
- (2) M5 x 0.8mm x 12mm Pan-Head Screw
- (1) Round Saddle Adapter
- (1) Hanger Bolt
Details:
- Supports ADA requirements
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
- Bracket U.S. Design Patent No. D787,302)
- Mounting U.S Design Publication No. 2016/0377221
Links & Downloadable materials:
Applications:
Support for railings, railing system components, marine locations, docks, beach fronts, residential spaces, outdoor locations, public walkways, pathways, stairways, commercial sites, schools, urban locations, safety barriers, offices, etc.
Handrail Bracket - Pulsar
HBWA.010
Regular price $39.00
Shipping calculated at checkout.
The Pulsar Handrail Wall Bracket is a cutting-edge stainless steel wall bracket with sleek, modern properties. AISI 316 stainless steel construction ensures superior durability against corrosion, debris and water. Compatible with round, square and rectangular handrails.
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Pulsar Handrail Bracket is a cutting-edge stainless steel wall bracket with sleek, modern properties. Compatible with round, square and rectangular handrails
Recommended for use in indoor and outdoor locations, the ANSI 316 stainless steel handrail bracket provides a secure platform for railings. Suitable for compliance with ADA requirements.
This corrosion-resistant product can be installed on handrail tubing/top rails (wood or steel). Mounting to flat surfaces is facilitated by two openings on the circular mounting plate and two M5 screws (included). Railing components are secured on the platform of the bracket via two mounting holes. ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
What is included in the kit?
- (1) Handrail Bracket -HBWA.010
- (2) M5 x 0.8mm x 12mm Pan-Head Screw
Details:
- Supports ADA requirements
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
- Bracket U.S. Design Patent No. D806,525
Links & Downloadable materials:
Applications:
Support for railings, railing system components, marine locations, docks, beach fronts, residential spaces, outdoor locations, public walkways, pathways, stairways, commercial sites, schools, urban locations, safety barriers, offices, etc.
Handrail Bracket - Redshift Quasar
HBWA.012.LAG
Regular price $24.69
Shipping calculated at checkout.
The Redshift Handrail Wall Bracket is part of our new Quasar collection. It is sleek and modern in design. It benefits from our new proprietary interchangeable mounting mechanism (U.S Design Publication No. 2016/0377221) which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass. Suitable for round, square or rectangular handrail tubing
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Redshift Handrail Bracket is part of our new Quasar collection It is sleek and modern in design. It benefits from our new proprietary interchangeable mounting mechanism which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass. Suitable for round or square/rectangular handrail tubing.
Recommended for use in indoor and outdoor locations, the ANSI 316 stainless steel handrail bracket provides a secure platform for railings. Suitable for compliance with ADA requirements.
This corrosion-resistant product can be installed on handrail tubing/top rails (wood or steel). Mounting to flat surfaces is facilitated by two openings on the circular mounting plate and two M5 screws (included). Railing components are secured on the platform of the bracket via two mounting holes. ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
What is included in the kit?
- (1) Handrail Bracket - HBWA.013
- (2) M5 x 0.8mm x 12mm Pan-Head Screw
- (1) Round Saddle Adapter
- (1) Hanger Bolt
Details:
- Supports ADA requirements
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
- Bracket U.S. Design Patent No. D787,302)
- Mounting U.S Design Publication No. 2016/0377221
Links & Downloadable materials:
Applications:
Support for railings, railing system components, marine locations, docks, beach fronts, residential spaces, outdoor locations, public walkways, pathways, stairways, commercial sites, schools, urban locations, safety barriers, offices, etc.
Handrail Bracket - Round
HBWA.005.LAG
Regular price $39.00
Shipping calculated at checkout.
The Stainless Steel Handrail Bracket Round for round or flat handrail. Sleek in design, easy to install and is safe and sturdy upon completion. It benefits from our new interchangeable mounting mechanism which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass.
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Redshift Handrail Bracket is part of our new Quasar collection It is sleek and modern in design. It benefits from our new proprietary interchangeable mounting mechanism which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass. Suitable for round or square/rectangular handrail tubing.
Recommended for use in indoor and outdoor locations, the ANSI 316 stainless steel handrail bracket provides a secure platform for railings. Suitable for compliance with ADA requirements.
This corrosion-resistant product can be installed on handrail tubing/top rails (wood or steel). Mounting to flat surfaces is facilitated by two openings on the circular mounting plate and two M5 screws (included). Railing components are secured on the platform of the bracket via two mounting holes. ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
What is included in the kit?
- (1) Handrail Bracket - HBWA.005
- (2) M5 x 0.8mm x 12mm Pan-Head Screw
- (1) Round Saddle Adapter
- (1) Hanger Bolt
Details:
- Supports ADA requirements
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
- Bracket U.S. Design Patent No. D787,302)
- Mounting U.S Design Publication No. 2016/0377221
Links & Downloadable materials:
Applications:
Support for railings, railing system components, marine locations, docks, beach fronts, residential spaces, outdoor locations, public walkways, pathways, stairways, commercial sites, schools, urban locations, safety barriers, offices, etc.
Handrail Bracket - Round Slim
HBWA.006
Regular price $31.78 Sale price $22.25 Save $9.53
Shipping calculated at checkout.
Round Slim handrail bracket benefits from our new interchangeable mounting mechanism (U.S Design Publication No. 2016/0377221) which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass. It is sleek and modern in design.Suitable for round, square or rectangular handrail tubing
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
The Round Slim Handrail Bracket is design adds to the easy of installation. It is modern in design. It benefits from our new proprietary interchangeable mounting mechanism which makes it easy to mount to various surfaces such as Wood/Sheet Rock, Steel or Glass. Suitable for round or square/rectangular handrail tubing.
Recommended for use in indoor and outdoor locations, the ANSI 316 stainless steel handrail bracket provides a secure platform for railings. Suitable for compliance with ADA requirements.
This corrosion-resistant product can be installed on handrail tubing/top rails (wood or steel). Mounting to flat surfaces is facilitated by two openings on the circular mounting plate and two M5 screws (included). Railing components are secured on the platform of the bracket via two mounting holes. ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
What is included in the kit?
- (1) Handrail Bracket - HBWA.006
- (1) M6 Top Rail Bolt
- (1) Hanger Bolt
Details:
- Suitable for round handrail of 1 1/2" to 2" diameter
- Supports ADA requirements
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
- Mounting U.S Design Publication No. 2016/0377221
Links & Downloadable materials:
Applications:
Support for railings, railing system components, marine locations, docks, beach fronts, residential spaces, outdoor locations, public walkways, pathways, stairways, commercial sites, schools, urban locations, safety barriers, offices, etc.
Handrail Bracket - Square
HBWA.008.167
Regular price $49.00
Shipping calculated at checkout.
The Stainless Steel Handrail Bracket - Square- is for Flat Bottom Tube is modern in design, easy to install and safe and sturdy upon completion. This bracket leaves a 1 9/16" gap between a wall and the top rail, meeting ADA requirement of a 1 1/2" gap. Also, our detailed instructions below ensures a smooth installation and results in a dependable handrail. ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
2x M5 screws included to attach the bracket to a steel handrail
Wall Bracket Screw/ Hanger Bolt is included in this item and is required for mounting.
M8 x 100mm Toggle Anchor Bolt with Zinc Plating is used to connect the bracket to the metal stub (need to purchase separately)
For mounting into concrete you would need to buy separately Lag Shield Anchors (3/8 in X 2-1/2 in)
A
Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run
Reference:
Shop our Handrail Bracket Collection
Overview
These are instructions for proper installation of a Handrail Bracket - into into sheetrock, wood, or drywall surfaces
This bracket comes with a saddle for both flat and round tubing and a wall bracket screw/hanger bolt
Brackets should be installed with a maximum distance of 4’
Caution:
Wear protective ANSI approved safety glasses, working gloves and breathing mask at all times
Tools Required:
Instructions
1) Using a stud finder, locate a stud and the vertical point from the nose of your stair (typically 31” vertically depending on your stair angle) and pre drill a hole in the stud using 3/16” drill bit.
2) Loosen the 2.5mm Allen set screw enough on the underside of the main horizontal column to clear a few threads; a small internal sleeve (#3) will be released.
3) Place the wall flange (#2) over the machine threaded end of the wall bracket screw (#1) and use fingers to tighten #3 over the machine threads.
4) Drive assembled screw and flange into the wall; secure the lag end of the stud with a 4mm hex wrench.
5) Position the flat or round saddle onto the vertical column, and tighten the connection bolt with a 4mm hex wrench to secure the saddle.
6) Back out the Allen set screw on the underside of the horizontal column with a 2.5mm wrench, then insert the assembled vertical column into the open square of the horizontal column to the desired height and tighten.
7) Slide the complete main assembly onto the mounted sleeve in the wall, adjust to your desired angle and tighten the 2.5mm screw with a hex wrench
Refer to Tip Sheet - Installing Stainless Steel Handrails for further instructions
NOTE: A small amount of surface corrosion is not uncommon after some exposure to weather or salty conditions; we recommend using our passivation solution or a stainless steel polish to prevent surface corrosion; more information available on our Engineering Specs Page
The Stainless Steel Handrail Bracket - Square Magnetar - is a high-strength bracket with heavy-duty applications. Compared to other wall brackets available on the market today, this product incorporates two pivot points instead of the standard three. Because of this, there are less points of failure on the bracket, resulting in an extremely durable support system.
Recommended for use in indoor and outdoor locations, the ANSI 316 stainless steel handrail bracket provides a secure platform for railings. Suitable for compliance with ADA requirements.
This corrosion-resistant product can be installed on handrail tubing/top rails (wood or steel). Mounting to flat surfaces is facilitated by two openings on the circular mounting plate and two M5 screws (included). Railing components are secured on the platform of the bracket via two mounting holes. ANSI 316 stainless steel construction ensures an extremely durable handrail bracket that can withstand corrosive substances, such as saltwater, rain and cleaning solutions.
What is included in the kit?
- (1) Handrail Bracket - HBWA.014
- (2) M5 x 0.8mm x 12mm Pan-Head Screw
- (1) Round Saddle Adapter
- (1) Hanger Bolt
Details:
- Supports ADA requirements
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
- Bracket U.S. Design Patent No. D806,524
Links & Downloadable materials:
Applications:
Support for railings, railing system components, marine locations, docks, beach fronts, residential spaces, outdoor locations, public walkways, pathways, stairways, commercial sites, schools, urban locations, safety barriers, offices, etc.