- 36" Fascia Mount Rnd
- 36" Fascia Mount Squ
- 36" Fasica Mount Bar
- 36" Top Mount Bar
- 36" Top Mount Rnd
- 36" Top Mount Squ
- 42" Fascia Mount Rnd
- 42" Fascia Mount Squ
- 42" Top Mount Rnd
- 42" Top Mount Squ
- Arcadia
- Arcadia Fascia Mount
- Arcadia Fascia Mount Glass
- Arcadia Glass Clamp
- Arcadia Glass Railing
- Arcadia Railings
- Arcadia Stair
- Arcadia Surface Mount Glass
- Arcadia Top Mount
- Arcadia Top Mount Stairs
- Bar
- Bar Parts
- Bar Railing
- Cable
- Cable Parts
- Cable Railing Stair
- Cable Railings
- Chicago Square
- Chicago Square Fascia Mount
- Chicago Square Fascia Mount Handrail
- Chicago Square Fascia Stair
- Chicago Square Pivot Mount
- Chicago Square Stair
- Chicago Square Surface Mount
- Chicago Square Surface Mount No Toprail
- Chicago Square Surface Mount Toprail
- Chicago Square Top Mount
- Chicago Square Top Mount Toprail
- Commercial
- Countersunk
- custom work
- Fascia Mount Bar
- Flush Angle
- Glass clamp
- Glass Railings
- Handrail Brackets
- Handrail Parts
- Handrail Tube
- Hardware
- M5
- M6
- M6 Eye bolt
- M8
- More Details - Press & Latch - Surface Mount -
- P&L
- P&L Round
- P&L Square Post
- Pan Head
- passivation
- Pivot Mount
- Post Bracket
- Press & Latch
- Round Handrail
- Seattle Bar
- Socket Head
- Square Handrail
- Tensioner
- Terminal
- Tools
- Top Mount Bar
- Virgina Round Toprail
- Virginia Round
- Virginia Round Fascia Mount
- virginia round fascia mount handrail
- virginia round pivot mount
- Virginia Round Top Mount
- Wall Bracket
- 36" Fascia Mount Rnd
- 36" Fascia Mount Squ
- 36" Fasica Mount Bar
- 36" Top Mount Bar
- 36" Top Mount Rnd
- 36" Top Mount Squ
- 42" Fascia Mount Rnd
- 42" Fascia Mount Squ
- 42" Top Mount Rnd
- 42" Top Mount Squ
- Arcadia
- Arcadia Fascia Mount
- Arcadia Fascia Mount Glass
- Arcadia Glass Clamp
- Arcadia Glass Railing
- Arcadia Railings
- Arcadia Stair
- Arcadia Surface Mount Glass
- Arcadia Top Mount
- Arcadia Top Mount Stairs
- Bar
- Bar Parts
- Bar Railing
- Cable
- Cable Parts
- Cable Railing Stair
- Cable Railings
- Chicago Square
- Chicago Square Fascia Mount
- Chicago Square Fascia Mount Handrail
- Chicago Square Fascia Stair
- Chicago Square Pivot Mount
- Chicago Square Stair
- Chicago Square Surface Mount
- Chicago Square Surface Mount No Toprail
- Chicago Square Surface Mount Toprail
- Chicago Square Top Mount
- Chicago Square Top Mount Toprail
- Commercial
- Countersunk
- custom work
- Fascia Mount Bar
- Flush Angle
- Glass clamp
- Glass Railings
- Handrail Brackets
- Handrail Parts
- Handrail Tube
- Hardware
- M5
- M6
- M6 Eye bolt
- M8
- More Details - Press & Latch - Surface Mount -
- P&L
- P&L Round
- P&L Square Post
- Pan Head
- passivation
- Pivot Mount
- Post Bracket
- Press & Latch
- Round Handrail
- Seattle Bar
- Socket Head
- Square Handrail
- Tensioner
- Terminal
- Tools
- Top Mount Bar
- Virgina Round Toprail
- Virginia Round
- Virginia Round Fascia Mount
- virginia round fascia mount handrail
- virginia round pivot mount
- Virginia Round Top Mount
- Wall Bracket

Winter Sale
Jump Start The Year - 20% Off All Products in Cart

Cable Railing - Square Fascia Mount - Lower Stair Post - Tensioner
WSQU.PL.STR.LOW.32.018
Regular price $429.00The Cable Railing Press And Latch System Square Fascia Mount Lower Stair Post is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post with Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
***Stairs are often specific to the project with unique dimensions and structure.***
We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details
***Stairs are often specific to projects with unique dimensions and structure***
***This post requires custom work***
***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***
This post is designed to be placed at the bottom of a stair railing and to be installed on the top of your surface.
What is included in the kit?
- For 36" total height from the nose to nose of the stairs to the top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 7 Press and Latch Cable Tensioners
- 1 Pivot Flange
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post Assembly Drawing
- Round Post Assembly Drawing
- Installation Guide
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
Please refer to the following document for Recommended Stairs Post Placement
Cable Railing - Square Fascia Mount - Upper Stair Post - Terminal
WSQU.PL.STR.UPP.018
Regular price Sale price $375.00The Cable Railing Press And Latch System Square Fasica Mount Upper Stair Post is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post with Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
***Stairs are often specific to the project with unique dimensions and structure.***We recommend emailing us any pictures, plans, or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details

Cable Railing - Square Top Mount - Lower Stair Post - Teminal
SQU.PL.STR.LOW.32.018
Regular price $331.00 Sale price $231.70 Save $99.30The Cable Railing Press And Latch System Square Top Mount Bottom Stair Post is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post with Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
***Stairs are often specific to the project with unique dimensions and structure.*** We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details
***Stairs are often specific to projects with unique dimensions and structure***
***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***
This post is designed to be placed at the bottom of a stair railing and to be installed on the top of your surface..
- 36" in height, measuring from nose to nose using Inline Design's top rail
What is included in the kit?
- For 36" total height from the nose to nose of the stairs to the top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 8 Press and Latch Cable Tensioners
- Square Base Cover or Round Base Cover
OR
- For 42" total height rom the nose to nose of the stairs to the top of the handrail. This post requires custom fabrication.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post Assembly Drawing
- Round Post
- Installation Guide
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
Please refer to the following document for Recommended Stairs Post Placement

Cable Railing - Square Top Mount - Mid Stair Post
SQU.PL.STR.MID.32
Regular price $165.00 Sale price $115.50 Save $49.50The Cable Railing Press And Latch System Square Top Mount MID Stair Post is a piece of our Press And Latch Cable Railing System. Included in this item is: one square pre drilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
***Stairs are often specific to the project with unique dimensions and structure.*** We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details
***Stairs are often specific to projects with unique dimensions and structure***
***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***
This post is designed to be placed at the middle of a stair railing and to be installed on the top of your surface. we match the angle nose to nose angle, comes stock in either 32º- 37º or 37º - 42º or we will match your angle.
- What is included in the kit?
- For 36" total height from the nose to nose of the stairs to the top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 8 holes with a Diameter 5/32"
- Square Base Cover or Round Base Cover
OR
- For 42" total height rom the nose to nose of the stairs to the top of the handrail. This post requires custom fabrication.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 8 holes with a Diameter 5/32"
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post Assembly Drawing
- Round Post
- Installation Guide
- Press and Latch Specs
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
Please refer to the following document for Recommended Stairs Post Placement
Cable Railing - Square Top Mount - Upper Stair Post - Tensioner
SQU.PL.STR.UPP.018
Regular price $303.00 Sale price $212.10 Save $90.90The Cable Railing Press And Latch System Square Top Mount Upper Stair Post is a piece of our Press And Latch Cable Railing System. Included in this item is: one square pre drilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".***Stairs are often specific to the project with unique dimensions and structure.*** We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details
***Stairs are often specific to projects with unique dimensions and structure***
***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***
This post is designed to be placed at the top of a stair railing and to be installed on the top of your surface. This Post can either end a cable run, continue 180º or turn left or right.
What is included in the kit?
Upper Stair Post End
- For 36" total height from the nose to nose of the stairs to the top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 8 Press and Latch Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height rom the nose to nose of the stairs to the top of the handrail. This post requires custom fabrication.
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Cable Terminals
- Square Base Cover or Round Base Cover
Upper Stair Post 180º, 90ºL or 90ºR
- For 36" total height from the nose to nose of the stairs to the top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 8 Press and Latch Cable Tensioners
- 10 Press and Latch Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height rom the nose to nose of the stairs to the top of the handrail. This post requires custom fabrication.
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post Assembly Drawing
- Round Post
- Installation Guide
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
Please refer to the following document for Recommended Stairs Post Placement

Cable Railing - Surface Mount - Corner Post
TSQU.PL.42.CRN.018
Regular price $545.00The Cable Railing Press System Square Top Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - Corner Post
TSQU.PL.36.CRN.018
Regular price $501.00The Cable Railing Press And Latch System Square Top Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - Corner Post
TRND.PL.36.CRN.018
Regular price $501.00The Cable Railing Press And Latch System Round Top Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - Corner Post
TRND.PL.42.CRN.018
Regular price $545.00The Cable Railing Press System Round Top Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - End Post - Tensioner
TSQU.PL.36.TEN.018
Regular price $397.00 Sale price $377.15 Save $19.85The Cable Railing Press And Latch System Square Top Mount End Post Tensioner is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post and Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- Square Base Cover
- Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- Square Base Cover
- Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - End Post - Tensioner
TSQU.PL.42.TEN.018
Regular price $397.00The Cable Railing Press And Latch System Square Top Mount End Post Tensioner is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post and Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- Square Base Cover
- Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- Square Base Cover
- Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - End Post - Tensioner
TRND.PL.36.TEN.018
Regular price $397.00The Cable Railing Press And Latch System Round Top Mount End Post Tensioner is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- Square Base Cover
- Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- Square Base Cover
- Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - End Post - Tensioner
TRND.PL.42.TEN.018
Regular price $449.00The Cable Railing Press And Latch System Round Top Mount End Post Tensioner is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- Square Base Cover
- Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- Square Base Cover
- Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - End Post - Terminal
TSQU.PL.36.TER.018
Regular price $353.00The Cable Railing Press And Latch System Square Top Mount End Post Terminal is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - End Post - Terminal
TSQU.PL.42.TER.018
Regular price $395.00The Cable Railing Press And Latch System Square Top Mount End Post terminal is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - End Post - Terminal
TRND.PL.36.TER.018
Regular price $353.00The Cable Railing Press And Latch System Round Top Mount End Post Terminal is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - End Post - Terminal
TRND.PL.42.TER.018
Regular price $395.00 Sale price $375.25 Save $19.75The Cable Railing Press And Latch System Round Top Mount End Post terminal is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - Extension Post
TSQU.PL.36.MID.EXT.018
Regular price $533.00The Cable Railing Press And Latch System Square Top Mount Extension Post is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - Extension Post
TSQU.PL.42.MID.EXT.018
Regular price $545.00The Cable Railing Press And Latch System Square Top Mount Extension Post is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - Extension Post
TRND.PL.36.MID.EXT.018
Regular price $501.00The Cable Railing Press And Latch System Round Top Mount Extension Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - Extension Post
TRND.PL.42.MID.EXT.018
Regular price $545.00The Cable Railing Press And Latch System Round Top Mount Extension Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - Mid Post
TSQU.PL.36.MID
Regular price $191.57The Cable Railing Press And Latch System Square Top Mount Mid Post is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable mid post is to be placed are required every 4' of railing and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled
- 10 holes with a Diameter 5/32"
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 holes with a Diameter 5/32"
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 42" Assembly Drawing
- Square Post 36" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Press and Latch Specs
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Surface Mount - MID Post
TSQU.PL.42.MID
Regular price $194.00 Sale price $184.30 Save $9.70The Cable Railing Press And Latch System Square Top Mount Mid Post is a piece of our Press And Latch cable railing system. Included in this item is: one square predrilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".

Cable Railing - Surface Mount - MID Post
TRND.PL.42.MID
Regular price $194.00 Sale price $184.30 Save $9.70The Cable Railing Press And Latch System Round Top Mount Mid Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".

Cable Railing - Surface Mount - Mid Post
TRND.PL.36.MID
Regular price $182.00 Sale price $172.90 Save $9.10The Cable Railing Press And Latch System Round Top Mount Mid Post is a piece of our Press And Latch cable railing system. Included in this item is: one round predrilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post has a diameter of 1.67 " with a thickness of 0.124".
This cable mid post is to be placed are required every 4' of railing and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled
- 10 holes with a Diameter 5/32"
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 holes with a Diameter 5/32"
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 42" Assembly Drawing
- Square Post 36" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Press and Latch Specs
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing Press and Latch Cable Terminal
CBL.PL.TER.018.SS
Regular price Sale price $21.00Press and Latch Cable Terminal doesn't need any special tooling to install which saves up to 80% in installation time compared to other systems available on the market. Available for three different mounting types, straight, Pivot and Lag fitting cable sizes 1/8" and 5/32".
Overview
These instructions provide step-by-step installation guidelines for installing the Press and Latch Cable Tensioner and Terminals on straight runs. The Tensioners and Terminals are designed for 1x19 construction stainless steel cables. They are designed to handle either of diameter 5/32” or 1/8” cable. Each run of cable has a Cable Tensioner on one side and a Cable Terminal from the other side.
Press and Latch system only works with 1x19 strand construction cable.
Caution:
Wear ANSI approved safety glasses, working gloves and breathing mask at all times.
Tools Required:
Part List:
-
Cable Tensioner Kit
-
Cable Terminal Kit
- Curved and Flat Washers (included in Cable Fitting kit)
- Release tool

Important Note: All fittings (Tensioners and Terminals) need to be oiled before attaching them to the posts. Do no skip this step or the cable won’t latch properly and will sag later. Spray WD40 inside the jaw latch mechanism.
- Begin by inserting the provided washers (flat washer for square posts and curved washer for round posts) into the cable Tensioner and Terminal then screw them into the posts using a 10mm wrench. Make sure they are tightened well
- Press the cable into the terminal side first (for about 1 1/4” until it hits the back of the fitting) then make a sudden pull so the jaws latch on the cable. Watch this video for more details on how to sudden pull the cable
- Unscrew the turnbuckle of the tensioner to about 1 1/4” from each side, then mark your cable for the cut
- Cut the cable using the cable cutter. You could release the cable from the cable ender (using the Release Tool) to measure and cut the remaining run of cables.
- Release the tensioner turnbuckle. Press the cable into the tensioner latch mechanism (for about 1 1/4” until it hits the back of the fitting), then make a sudden pull so the jaws latch on the cable
-
- Using two 10 mm wrenches (as shown in the below picture) assemble back the tensioner turnbuckle until the cable is tightened, then give the cable a small kick to latch it again. Then tighten the turnbuckle for the last time. Avoid twisting the cable by keeping the front part of the tensioner steady from rotating, the goal is to pull and tension the cable not twist it.
-
One common problem is cutting the cable too long. In this case, the cable tensioner doesn’t have enough threads left over to tighten the cable. Use the release tool to take the cable out, and return to step 3.
8) Another common problem is the cable keep pulling out from the cable fittings. In this case, the jaws inside don’t latch on the cable. Apply WD-40, and make sudden pulls to ensure the cable is latched.
9) Repeat the same for the rest of the cables of this run. The tensioners have a very high tensioning capability. The goal is to have equal tension force on all the cables. Over-tightening one cable will make the other cable loose. Be careful not to over tighten the cables. Make sure as well that the top rail tubing is properly installed and solid.
10) After making sure that all the cables are equally tensioned, tighten the two lock washers located at the two ends of the turnbuckles
Downloads:
Custom work - Detailing
mch.001
Regular price $95.00Shop time by the hour for custom orders
Custom work - Labor
MCH.000
Regular price $85.00Shop time by the hour for custom orders
Fascia Mounting Plate
PLT.FLT
Regular price $22.00Fascia Mounting Plate

Glass Clamp - Arcadia - Full
GC.ARC.FULL
Regular price $20.00ANSI 316 Stainless Steel Square Glass Clamp Half Style is designed for our Arcadia railing system. This stainless steel glass clamp that secures to the Arcadia end post or corner post ensures a railing system that is sleek in design, easy to install and is safe and sturdy upon completion.
Arcadia Glass Clamp - Full
Part Number: GC.ARC.FULL
Links & Downloadable materials:
- Arcadia Glass Clamp Full Dimensional Drawing
- Installation Guide
Arcadia Glass Clamp - Half
Part number: GC.ARC.HALF
- Arcadia Glass Clamp Half Dimensional Drawing
- Installation Guide

Glass Clamp - Arcadia - Half
GC.ARC.HALF
Regular price $17.00ANSI 316 Stainless Steel Square Glass Clamp Half Style is designed for our Arcadia railing system. This stainless steel glass clamp that secures to the Arcadia end post or corner post ensures a railing system that is sleek in design, easy to install and is safe and sturdy upon completion.
Arcadia Glass Clamp - Full
Part Number: GC.ARC.FULL
Links & Downloadable materials:
- Arcadia Glass Clamp Full Dimensional Drawing
- Installation Guide
Arcadia Glass Clamp - Half
Part number: GC.ARC.HALF
- Arcadia Glass Clamp Half Dimensional Drawing
- Installation Guide

Glass Clamp - Glass Adapter
GA0.000.030
Regular price Sale price $22.99ANSI 316 Stainless Steel Glass Adapter connects a glass panel to a wall with a simple, modern, and floating look. This adapter is designed to work with 1/4", 3/8", 1/2", 5/8" or 3/4" glass thickness.
Overview
These instructions will provide step-by-step installation guidelines for installing the Glass Adapter. The Glass adapter comes with 2 round rubber gaskets, standoff column (30/40 mm), and the mounting sleeve (you will need to purchase the connection screw separately).
Glass Adapter should be installed with a maximum distance of every 4 feet.
Caution: Wear protective ANSI approved safety glasses, working gloves and mask at all times
Tools Required
- Drilling tool to go into wood/concrete
- 1/4” drill bit
- Holes require on glass is 1” in diameter.
Instructions
- When using a 3/8” lag screw, spot drill using 1/4” drill bit, different mounting surfaces require different methods.
- Begin with only the mounting sleeve with the appropriate screw
- Twist the standoff column (#3) on to the sleeve.
-
Insert the gasket #4, place the glass in place, then gasket #5, and then place cap #6 and screw in over the glass . The hole size on the glass is 1” diameter.
Downloads:
NOTE: A small amount of surface corrosion is not uncommon after some exposure to weather or salty conditions; we recommend using our passivation solution or a stainless steel polish to prevent surface corrosion; more information available on our Engineering Specs Page

Glass Clamp - Glass Adapter - 2 PK
GA0.000.000.PMT.030
Regular price Sale price $46.35ANSI 316 Stainless Steel Glass Adapter connects a glass panel to a wall with a simple, modern, and floating look. This adapter is designed to work with 1/4", 3/8", 1/2", 5/8" or 3/4" glass thickness.
Overview
These instructions will provide step-by-step installation guidelines for installing the Glass Adapter. The Glass adapter comes with 2 round rubber gaskets, standoff column (30/40 mm), and the mounting sleeve (you will need to purchase the connection screw separately).
Glass Adapter should be installed with a maximum distance of every 4 feet.
Caution: Wear protective ANSI approved safety glasses, working gloves and mask at all times
Tools Required
- Drilling tool to go into wood/concrete
- 1/4” drill bit
- Holes require on glass is 1” in diameter.
Instructions
- When using a 3/8” lag screw, spot drill using 1/4” drill bit, different mounting surfaces require different methods.
- Begin with only the mounting sleeve with the appropriate screw
- Twist the standoff column (#3) on to the sleeve.
-
Insert the gasket #4, place the glass in place, then gasket #5, and then place cap #6 and screw in over the glass . The hole size on the glass is 1” diameter.
Downloads:
NOTE: A small amount of surface corrosion is not uncommon after some exposure to weather or salty conditions; we recommend using our passivation solution or a stainless steel polish to prevent surface corrosion; more information available on our Engineering Specs Page

Glass Clamp - Round - Flat Surface
GCRF.LRG.167
Regular price $20.00 Sale price $19.00 Save $1.00ANSI 316 Stainless Steel Large Round Glass Clamp for Flat Surface is just a piece of our Chicago Square style glass railing system. This glass clamp ensures a railing system that is sleek in design, easy to install and is safe and sturdy upon completion.

Glass Clamp - Round - Round Surface
GCRR.LRG.167
Regular price $20.00ANSI 316 Stainless Steel Round Glass Clamp for Round Surface is a piece of our Virginia Round style glass railing system. This stainless steel round glass clamp ensures a railing system that is sleek in design, easy to install and is safe and sturdy upon completion.