Handrail Brackets
Sleek and modern in design, made from ANSI 316 Stainless Steel, our Handrail Brackets are engineered to meet ADA requirements that can handle interior and exterior applications. They are functional and can be mounted on different surfaces ranging from Glass, Wood Stud, Steel Stud, Brick, Concrete, to Steel Frame.
Handrail Brackets are often bought with Handrail Parts to build a complete Handrail modular system.
You need a Handrail Bracket every 4' +/- 6" maximum and 1' +/- 6" maximum from the ends.
Pinch Handrail Grip does not meet ADA requirements of Handrail Grip Safety like Power Handrail Grip does. The Pinch Grip is only about 25% of the maximum grip strength possible by the Power Grip.
Pinch Grip is the act of using the tip of the fingers to pull a small object like a spoon. Power Grip is the act of holding with the entire surface of your hand's palm on a cylindrical object like a Handrail Tube. The ideal Handrail Tube size for Power Handrail Grip is between 1 1/4" to 2" in diameter.
Investing in high-quality stainless steel handrail brackets from Inline Design is a wise decision for those who value safety, durability, and style. Our handrail brackets are made from premium-grade stainless steel, ensuring longevity and resistance to corrosion and wear. With a variety of stylish designs to choose from, you can find the perfect match for your home or office decor. Our handrail brackets are easy to install, providing a secure and sturdy grip that will give you and your loved ones peace of mind while navigating your space.
At Inline Design, we take pride in our commitment to exceptional customer service and quality products, and we are confident that our handrail brackets will meet and exceed your expectations.
Handrails are functional, durable assemblies that you can install in a wide range of applications. Individuals should consider structural requirements, location, and compliance with building codes. Understanding these elements while planning may help you avoid issues and get the most out of your design. See our Handrail Design Guidance for detailed information.
KEY POINTS
- What is a Handrail?
- When is a Handrail Required?
- What are the Basic Requirements of a Handrail?
- What is a Guardrail?
- When is a Guardrail Required?
- What are the Basic Requirements of a Guardrail?
1. What is a Handrail?
Handrails aren't guardrails, although the terminology is often used interchangeably. A Handrail provides a graspable surface along stairs that assist in preventing falls and complies with ADA guidelines. Handrails provide a third point of contact and allow for a stable transition with stairs, ramps, and maneuvering in slippery environments.
2. When is a Handrail Required?
Handrails shall be on at least one side of each continuous run of treads or flight with 2 or more risers with no part of the stairway or ramp shall be more than 30" from a Handrail.
3. What are the Basic Requirements of a Handrail?
Height
The Handrail height shall be between 34 inches (865 mm) and 38 inches (965 mm) measured vertically from stair nosings, ramp surfaces, and walking surfaces. Handrails height shall be consistent across all surfaces.
Continuity
Handrails shall be continuous for the entire stairs, and Handrails end shall be returned or terminated in newel posts or safety terminals. Handrails shall have a space of not less than 1 1⁄2" between a wall and the Handrail.
Size
Circular Handrails shall have a diameter of 1 1⁄4" – 2".
Profile Shape
- No non-circular Handrail shall have a perimeter less than 4"
- If the perimeter is 4"–61⁄4"shall have a maximum cross-section of 2 1⁄4"
- If the perimeter is greater than 6 1⁄4" shall have a graspable finger recess area on both sides
4. What is a Guardrail?
A guardrail is used to prevent people from falling off of a stairway rather than falling. A guardrail can also act as a barrier for a porch, deck, or balcony, preventing people from falling off the edge. Often guardrails on stairs will act as Handrails.
5. When is a Guardrail Required?
Along any open-sided walking surface, including stairs, ramps, and landings, located more than 30" vertically above grade at any point within 36" horizontally to the edge of the open side. If a stair is more than 30" above grade at any point in the stair’s flight, a guard is required along the full length of the open side.
6. What are the Basic Requirements of a Guardrail?
Height
36" minimum above the walking surface or the line connecting the leading edge of treads.
Opening limitations
No openings shall be large enough to allow a 4" diameter sphere to pass through with the following exceptions:
- Triangular openings on a stair between the tread, riser, and bottom rail of a guard, shall not allow a 6" diameter sphere to pass through.
- Other openings on guards located on stairs shall not allow a 4 3/8" sphere to pass through.
This handout is for general informational purposes only and is not a substitute for the full code text. If discrepancies arise, the code shall govern.
Customers are encouraged to contact their local state or city to get information about their local building codes. City building codes supersede national building codes. Inline Design provides this information in an advisory capacity only and is not liable for any code non-compliance.
