
Winter Sale
Jump Start The Year - 20% Off All Products in Cart

ANSI Rectangular Bar - 13' x 1 3/4" x 5/8"
REC.BAR.013.004
Regular price $348.00 Sale price $328.00 Save $20.00Arcadia Flat Solid Rectangular Bar of 13' (4 meters) of 1 3/4" x 5/8" used as top rail. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
*** Lengths over 7 feet need to be shipped via LTL. Please contact sales for a Shipping quote ***
Specifications:
Part of the Arcadia Series
For Commercial and High End Residential
Stainless Steel Marine Grade 316
Satin Finish
Arcadia Flat Solid Rectangular Bar of 13' (4 meters) of 1 3/4" x 5/8" used as top rail. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
Details:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Cable Railing - Arcadia - Fascia Mount - Inside Corner Post
W.ARC.CBL.CRN.36.I.018
Regular price $639.00The Cable Railing Press and Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing systems. This ANSI 316 Stainless Steel corner post is to be placed used on a 90 degree inside corner and to be installed 1" below the edge of your surface. The stock sizes are designed for a 36" and 42" railings heights and measure 36.5" and 42.5" respectively. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar has to be welded.
This cable corner post is to be placed at the 90 degree corner of a deck or a balcony. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 10 Press and Latch Straight Cable Terminals
- 10 Press and Latch Straight Cable Tensioners
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- 12 Press and Latch Straight Cable Terminals
- 12 Press and Latch Straight Cable Tensioners
- One outside corner plate (see drawings for dimensions)
Details:
- Part of the Arcadia Series
- Designed for Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flanges L shape and Base Cover Dimensional Drawing
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Fascia Mount - MID Post
W.ARC.CBL.MID.36
Regular price $215.00The Cable Railing Press and Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing systems. This ANSI 316 Stainless Steel corner post is to be placed between corner and end posts and to be installed 1" below the edge of your surface. The stock sizes are designed for a 36" and 42" railings heights and measure 36.5" and 42.5" respectively. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar has to be welded.
This cable middle post is to be placed between End or Corner Posts to support the top rail for a long straight run and and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height from the surfrace to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: 10 Predrilled holes (5mm) [Post height without the top rail is 42 3/8"]
- A middle post is required for every 4' cable railing
OR
-
For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: 12 Predrilled holes (5mm) [Post height without the top rail is 48 5/8"]
- A middle post is required for every 4' cable railing
- One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Specifications:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel Finish
- ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.75" Post Dimensional Drawing
- Fasica Bracket Single Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
Cable Railing - Arcadia - Fascia Mount - Outside Corner Post
W.ARC.CBL.CRN.36.O.018
Regular price $639.00This cable corner post is to be placed at the 90 degree corner of a deck or a balcony. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 10 Press and Latch Straight Cable Terminals
- 10 Press and Latch Straight Cable Tensioners
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- 12 Press and Latch Straight Cable Terminals
- 12 Press and Latch Straight Cable Tensioners
- One outside corner plate (see drawings for dimensions)
Details:
- Part of the Arcadia Series
- Designed for Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flanges L shape and Base Cover Dimensional Drawing
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Fascia Mount - Tensioner
W.ARC.CBL.TEN.36.018
Regular price $407.00The Cable Railing Press And Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing system. This cable tensioners post is to be placed at the beginning or at the end of a straight run. the post come stock in both 36" and 42" post heights. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 42 3/8"]
- 10 Press and Latch Straight Cable Tensioners
OR
-
For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 48 5/8"]
- 12 Press and Latch Straight Cable Tensioners
- One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Details:
- Part of the Arcadia Series
- For Commercial and High End Residential
- 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.75" Post Dimensional Drawing
- Fascia Bracket Double Dimensional Drawing
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Fascia Mount - Terminal
W.ARC.CBL.TER.36.018
Regular price $463.00The Cable Railing Press And Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing system. This cable terminal post is to be placed at the beginning or at the end of a straight run. The post come stock in both 36" and 42" post heights. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable terminal post is to be placed at the beginning or at the end of a straight run and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 42 3/8"]
- 10 Press and Latch Straight Cable Terminals
OR
-
For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 48 5/8"]
- 12 Press and Latch Straight Cable Terminals
- One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Specifications:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.75" Post Dimensional Drawing
- Fascia Bracket Double Dimensional Drawing
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
- Showroom
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
Cable Railing - Arcadia - Surface Mount - Corner Post
ARC.CBL.CRN.36.018
Regular price $507.00The Cable Railing Press and Latch System Arcadia Top Mount, Post is a piece of our Press And Latch cable railing system. This cable corner post is placed on 90º corner and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable corner post is to be placed at the 90 degree corner of a deck or a balcony. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
- For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 10 Press and Latch Straight Cable Terminals
- 10 Press and Latch Straight Cable Tensioners
OR
- For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x1.25mm) [Post height without the top rail is 41 7/8"]
- 12 Press and Latch Straight Cable Terminals
- 12 Press and Latch Straight Cable Tensioners
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flange II Shape & Base Cover Dimensional Drawings
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Surface Mount - MID
ARC.CBL.MID.36
Regular price $176.00The Cable Railing Press And Latch System Arcadia Top Mount, Post is a piece of our Press And Latch cable railing system. This cable middle post is to be placed at between the end posts and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable mid post is to be placed between end or corner post. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: 10 Predrilled holes (5mm) [Post height without the top rail is 35 7/8"]
- A middle post is required for every 5' cable railing
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: 12 Predrilled holes (5mm) [Post height without the top rail is 41 7/8"]
- A middle post is required for every 4' cable railing
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flange II Shape & Base Cover Dimensional Drawings
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Surface Mount - Tensioner
ARC.CBL.TEN.36.018
Regular price $397.00The Cable Railing Press And Latch System Arcadia Top Mount, Post is a piece of our Press And Latch cable railing system. This cable tensioners post is to be placed at the beginning or at the end of a straight run. the post come stock in both 36" and 42" post heights. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

Cable Railing - Arcadia - Surface Mount - Terminal
ARC.CBL.TER.36.018
Regular price $353.00The Cable Railing Press And Latch System Arcadia Top Mount, Post is a piece of our Press And Latch cable railing system. This cable terminal post is to be placed at the beginning or at the end of a straight run. The post come stock in both 36" and 42" post heights. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable enders post is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 10 Press and Latch Straight Cable Terminals
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- 12 Press and Latch Straight Cable Terminals
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flange II Shape & Base Cover Dimensional Drawings
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Surface Mount - Stair MID
ARC.CBL.MID.STR.35
Regular price $331.00The Cable Railing Press And Latch System Arcadia Stair Post System is a piece of our Press And Latch cable railing system. This Mid stair post is to be placed end post on the stairs. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

Cable Railing - Arcadia - Surface Mount - Upper Stair 180
ARC.CBL.UPP.180.35.018
Regular price $407.00The Cable Railing Press And Latch System Arcadia Stair Post System is a piece of our Press And Latch cable railing system. This upper stair post is to be placed at the top of the stairs with the railing continuing onto straight. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

Cable Railing - Arcadia - Surface Mount - Upper Stair End
ARC.CBL.UPP.35.018
Regular price $331.00The Cable Railing Press And Latch System Arcadia Stair Post System is a piece of our Press And Latch cable railing system. This upper stair post is to be placed at the top of the stairs with the railing ending. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

Cable Railing - Arcadia - Surface Mount - Upper Stair Left
ARC.CBL.UPP.LEF.35.018
Regular price $331.00The Cable Railing Press And Latch System Arcadia Stair Post System is a piece of our Press And Latch cable railing system. This upper stair post is to be placed at the top of the stairs with the railing continuing onto the left. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

Cable Railing - Arcadia - Surface Mount - Upper Stair Right
ARC.CBL.UPP.RIG.35.018
Regular price $331.00The Cable Railing Press And Latch System Arcadia Stair Post System is a piece of our Press And Latch cable railing system. This upper stair post is to be placed at the top of the stairs with the railing continuing onto the right. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

Cable Railing - Arcadia Top Mount - Lower Stair Post - Terminal
ARC.CBL.LOW.35.018
Regular price $375.00This post is to be placed at the bottom step of the stairs on the first step. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The post height is 42.5" and need to be cut to accomodate with the stairs' angle. The top rail bar is to be welded.

Cable Railing - Arcadia Top Mount - Lower Stair Post - Terminal
ARC.CBL.LOW.35.018
Regular price $375.00This post is to be placed at the bottom step of the stairs on the first step. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The post height is 42.5" and need to be cut to accomodate with the stairs' angle. The top rail bar is to be welded.

Cable Railing - Arcadia Top Mount - Lower Stair Post 180- Terminal
ARC.CBL.LOW.180.35.018
Regular price $375.00This post is to be placed at the bottom step of the stairs on the first step. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The post height is 42.5" and need to be cut to accomodate with the stairs' angle. The top rail bar is to be welded.

Glass Clamp - Arcadia - Full
GC.ARC.FULL
Regular price $20.00ANSI 316 Stainless Steel Square Glass Clamp Half Style is designed for our Arcadia railing system. This stainless steel glass clamp that secures to the Arcadia end post or corner post ensures a railing system that is sleek in design, easy to install and is safe and sturdy upon completion.
Arcadia Glass Clamp - Full
Part Number: GC.ARC.FULL
Links & Downloadable materials:
- Arcadia Glass Clamp Full Dimensional Drawing
- Installation Guide
Arcadia Glass Clamp - Half
Part number: GC.ARC.HALF
- Arcadia Glass Clamp Half Dimensional Drawing
- Installation Guide

Glass Clamp - Arcadia - Half
GC.ARC.HALF
Regular price $17.00ANSI 316 Stainless Steel Square Glass Clamp Half Style is designed for our Arcadia railing system. This stainless steel glass clamp that secures to the Arcadia end post or corner post ensures a railing system that is sleek in design, easy to install and is safe and sturdy upon completion.
Arcadia Glass Clamp - Full
Part Number: GC.ARC.FULL
Links & Downloadable materials:
- Arcadia Glass Clamp Full Dimensional Drawing
- Installation Guide
Arcadia Glass Clamp - Half
Part number: GC.ARC.HALF
- Arcadia Glass Clamp Half Dimensional Drawing
- Installation Guide

Glass Railing - Arcadia - Fascia Mount - End Post
W.ARC.GLS.END.36
Regular price $216.00The glass end post is part of our Acardia Collection. It is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass end post is to be placed at the beginning or at the end of a straight run and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 42 5/8"]
OR
-
For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 48 5/8"]
- 2 Glass Clamps (Half)
- One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Details:
- Part of the Arcadia Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.75" Post Dimensional Drawing
- 42.75" Post Dimensional Drawing
- Arcadia Glass Clamp Half Dimensional Drawing
- Fasica Bracket Single Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Glass Railing - Arcadia - Fascia Mount - Inside Corner Post
W.ARC.GLS.CRN.I.36
Regular price $403.00The glass inside corner post is part of our Acardia Collection. It is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass corner post is to be placed at the 90º outside corner of a deck or balcony and to be installed 1" below from the edge of the surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.75" total height from the surfrace to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 42 5/8"]
OR
-
For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 48 5/8"]
- One outside corner plate (see drawings for dimensions)
- 4 Glass Clamps (Half)
Details:
- Part of the Press and Latch Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.75" Post Dimensional Drawing
- 42.75" Post Dimensional Drawing
- Arcadia Glass Clamp Half Dimensional Drawing
- Fascia Bracket Corner Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Glass Railing - Arcadia - Fascia Mount - MID Post
W.ARC.GLS.MID.36
Regular price $223.00The glass Middle post is part of our Acardia Collection. It is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass middle post is to be placed between the end post and/or the corner post to support the top rail for a long straight run and to be installed 1" below the edge of your surface.Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Pre drilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- A middle post is required for every 5' cable railing
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Pre Drilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- A middle post is required for every 4' cable railing
- 2 Round Glass Clamps
- One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Details:
- Part of the Arcadia Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- Engineering Specifications Floor Mounted Glass 36 in Posts Placements
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Glass Clamp Full Dimensional Drawing
- Arcadia Floor Flange I shape & Base Cover Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Glass Railing - Arcadia - Fascia Mount - Outside Corner Post
W.ARC.GLS.CRN.O.36
Regular price $403.00The glass outside corner post is part of our Acardia Collection. It is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass corner post is to be placed at the 90º outside corner of a deck or balcony and to be installed 1" below from the edge of the surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.75" total height from the surfrace to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 42 5/8"]
OR
-
For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 48 5/8"]
- One outside corner plate (see drawings for dimensions)
- 4 Glass Clamps (Half)
Details:
- Part of the Press and Latch Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.75" Post Dimensional Drawing
- 42.75" Post Dimensional Drawing
- Arcadia Glass Clamp Half Dimensional Drawing
- Fascia Bracket Corner Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
Glass Railing - Arcadia - Top Mount - Corner Post
ARC.GLS.CRN.36
Regular price $303.00The glass corner post is part of our Acardia Collection. It is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass corner post is to be placed at the 90 degree corner of a deck or a balcony. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- 4 Glass Clamps (Half)
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- Engineering Specifications Floor Mounted Glass 36 in Posts Placements
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Glass Clamp Half Dimensional Drawing
- Arcadia Floor Flanges L shape and Base Cover Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Glass Railing - Arcadia - Top Mount - End Post
ARC.GLS.END.36
Regular price $182.00The glass End post is part of our Acardia Collection. It is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass end post is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- 2 Glass Clamps (Half)
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- Engineering Specifications Floor Mounted Glass 36 in Posts Placements
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Glass Clamp Half Dimensional Drawing
- Arcadia Floor Flange I shape & Base Cover Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Glass Railing - Arcadia - Top Mount - Mid Post
ARC.GLS.MID.36
Regular price $189.00This glass Middle post is part of our Arcadia Collection. It is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass middle post is to be placed between the end post and/or the corner post to support the top rail for a long straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- A middle post is required for every 5' cable railing
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- A middle post is required for every 4' cable railing
- 2 Round Glass Clamps
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- Engineering Specifications Floor Mounted Glass 36 in Posts Placements
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Glass Clamp Full Dimensional Drawing
- Arcadia Floor Flange I shape & Base Cover Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Glass Railing - Arcadia Top Mount - Lower Stair Post
ARC.GLS.LOW.STR
Regular price $375.00This post is to be placed at the lower of the stairs with the railing continuing onto straight. Unlike the other systems that we carry in stock, this system is not modular. The post height is 42.5" and need to be field cut to accommodate the angle of the stairs. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass end post is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The post height is 42.5" and need to be cut to accommodate with the stairs' angle The top rail bar is to be welded.
What is included in the kit?
- 42.5" Post
- Post: Pre Drilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 2 Glass Clamps (Half)
- One base cover
- Welded base flange
Details:
- Part of the Arcadia Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- Engineering Specifications Floor Mounted Glass 36 in Posts Placements
- Post Dimensional Drawing
- Arcadia Glass Clamp Half Dimensional Drawing
- Arcadia Floor Flange I shape & Base Cover Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Glass Railing - Arcadia Top Mount - Middle Stair Post
ARC.GLS.MID.STR
Regular price $209.00This post is to be placed at the top of the stairs with the railing continuing onto straight. Unlike the other systems that we carry in stock, this system is not modular. The post height is 42.5" and need to be field cut to accommodate the angle of the stairs. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass middle post is to be placed between the lower post and upper stair posts to support the top rail . Unlike the other systems that we carry in stock, this system is not modular. The post height is 42.5" and need to be cut to accomodate with the stairs' angle. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
- 42.5" Post: Predrilled and tapped (6.35 mm)
- 2 Glass Clamps Full
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- Engineering Specifications Floor Mounted Glass 36 in Posts Placements
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Glass Clamp Full Dimensional Drawing
- Arcadia Floor Flange I shape & Base Cover Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Glass Railing - Arcadia Top Mount - Upper Stair Post
ARC.GLS.UPP.STR
Regular price $375.00This post is to be placed at the middle of the stairs with the railing continuing onto straight. Unlike the other systems that we carry in stock, this system is not modular. The post height is 42.5" and need to be field cut to accommodate the angle of the stairs. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This glass end post is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The post height is 42.5" and need to be cut to accommodate with the stairs' angle The top rail bar is to be welded.
What is included in the kit?
- 42.5" Post
- Post: Pre Drilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 2 Glass Clamps
- One base cover
- Welded base flange
Details:
- Part of the Arcadia Series
- For Commercial or Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- Engineering Specifications Floor Mounted Glass 36 in Posts Placements
- Post Dimensional Drawing
- Arcadia Glass Clamp Half Dimensional Drawing
- Arcadia Floor Flange I shape & Base Cover Dimensional Drawing
- Installation Guide
Please refer to the following document for Mounting Options