Cable Railing Arcadia Fascia Mount Inside Corner Post

Cable Railing Arcadia Fascia Mount Inside Corner Post

W.ARC.CBL.CRN.36.I.018

Regular price $695.63 Sale price $556.50 Save 20%
/
Shipping calculated at checkout.

Size
Cable
Fitting
Only 5000 items in stock!

The Cable Railing Press and Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing systems. This ANSI 316 Stainless Steel corner post is to be placed used on a 90 degree inside corner and to be installed 1" below the edge of your surface. The stock sizes are designed for a 36" and 42" railings heights and measure 36.5" and 42.5" respectively. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar has to be welded.

This cable corner post is to be placed at the 90 degree corner of a deck or a balcony. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

What is included in the kit?

  • For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
    • Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
    • 10 Press and Latch Straight Cable Terminals
    • 10 Press and Latch Straight Cable Tensioners

OR

  • For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
    • Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
    • 12 Press and Latch Straight Cable Terminals
    • 12 Press and Latch Straight Cable Tensioners
  • One outside corner plate (see drawings for dimensions)

Details:

    • Part of the Arcadia Series
    • Designed for Commercial and High End Residential
    • ANSI 316 Stainless Steel
    • Finish ASTM A480 No 4 linearly textured satin finish

Links & Downloadable materials:

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options


Recently viewed