More Details - Press & Latch - Surface Mount - Upper Stair Post

***Stairs are often specific to projects with unique dimensions and structure***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the top of a stair railing and to be installed on the top of your surface.  This Post can either end a cable run, continue 180º or turn left or right.  

What is included in the kit?

Upper Stair Post End 

    • For 36" total height from the nose to nose of the stairs to the top of the handrail.  
    • Post: Pre Drilled and tapped (M8 x 1.25mm) 
    • 8 Press and Latch Cable Terminals
    • Square Base Cover or Round Base Cover

OR 

    • For 42" total height rom the nose to nose of the stairs to the top of the handrail.  This post requires custom fabrication.
    • Post: Pre drilled and tapped (M8 x 1.25mm)
    • 10 Press and Latch Cable Terminals
    • Square Base Cover or Round Base Cover

Upper Stair Post 180º, 90ºL or 90ºR

OR 

    • For 42" total height rom the nose to nose of the stairs to the top of the handrail.  This post requires custom fabrication.

Details:

    • Part of the Press and Latch Series
    • For Commercial or Residential
    • ANSI 316 Stainless Steel
    • Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement