More Details - Press & Latch - Surface Mount - Mid Stair Post

***Stairs are often specific to projects with unique dimensions and structure***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the middle of a stair railing and to be installed on the top of your surface. we match the angle nose to nose angle, comes stock in either 32º- 37º or 37º - 42º or we will match your angle.

  • What is included in the kit?
    • For 36" total height from the nose to nose of the stairs to the top of the handrail.
    • Post: Pre Drilled and tapped (M8 x 1.25mm)
    • 8 holes with a Diameter 5/32"
    • Square Base Cover or Round Base Cover

OR

    • For 42" total height rom the nose to nose of the stairs to the top of the handrail. This post requires custom fabrication.
    • Post: Predrilled and tapped (M8 x 1.25mm)
    • 8 holes with a Diameter 5/32"
    • Square Base Cover or Round Base Cover

Details:

    • Part of the Press and Latch Series
    • For Commercial or Residential
    • ANSI 316 Stainless Steel
    • Finish ASTM A480 No 4 linearly textured satin finish

Links & Downloadable materials:

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement