More Details - Arcadia - Surface Mount - End Post Terminal

This cable enders post is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

What is included in the kit?

  • For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
    • Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
    • 10 Press and Latch Straight Cable Terminals


  • For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
    • Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
    • 12 Press and Latch Straight Cable Terminals
  • One base cover
  • One welded base flange 


    • Part of the Arcadia Series
    • For Commercial and High End Residential
    • ANSI 316 Stainless Steel
    • Finish ASTM A480 No 4 linearly textured satin finish

Links & Downloadable materials:

    • 36.5" Post Dimensional Drawing
    •  42.5" Post Dimensional Drawing
    •  Arcadia Floor Flange II Shape & Base Cover Dimensional Drawings
    •  Cable Fittings Dimensional Drawings
    •  Installation Guide

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options