More Details - Arcadia - Fascia Mount - End Post Terminal

This cable terminal post is to be placed at the beginning or at the end of a straight run and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.


What is included in the kit?

  • For 36.5" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
    • Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 42 3/8"]
    • 10 Press and Latch Straight Cable Terminals


  • For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
    • Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 48 5/8"]
    • 12 Press and Latch Straight Cable Terminals
  • One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)



    • Part of the Arcadia Series
    • For Commercial and High End Residential
    • ANSI 316 Stainless Steel 
    • Finish ASTM A480 No 4 linearly textured satin finish

Links & Downloadable materials:


Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options