Press & Latch - Round Post collection

This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Terminals
  • Square Base Cover or Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Terminals
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing  
• Round Post  36" Assembly Drawing
• Round Post  42" Assembly Drawing    
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable mid post is to be placed are required every 4' of railing and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled 
  • 10 holes with a Diameter 5/32"
  • Square Base Cover or Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 holes with a Diameter 5/32"
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• Center to center cable distance: 3 1/8"
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 42" Assembly Drawing
• Square Post 36" Assembly Drawing
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing
• Installation Guide 
• Press and Latch Specs

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Tensioners
  • Square Base Cover
  • Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• Square Base Cover
• Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing  
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

***Stairs are often specific to projects with unique dimensions and structure***

***This post requires custom work***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed is the middle of a stair railing and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled
• 1 Pivot Flange
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post Assembly Drawing
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

This cable mid post is to be placed are required every 4' of railing and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled 
  • 10 holes with a Diameter 5/32"
  • Fascia Mounting Flange

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Pre drilled and tapped (M8 x 1.25mm)
• 12 holes with a Diameter 5/32"
• Fascia Mounting Flange

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• Center to center cable distance: 3 1/8"
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 42" Assembly Drawing
• Square Post 36" Assembly Drawing
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing
• Installation Guide 
• Press and Latch Specs

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Tensioners
  • 10 Press and Latch Straight Cable Terminals
  • Square Base Cover or Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 10 Press and Latch Straight Cable Terminals
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing  
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Tensioners
  • 10 Press and Latch Straight Cable Terminals
  • Square Base Cover or Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 10 Press and Latch Straight Cable Terminals
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing  
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

***Stairs are often specific to projects with unique dimensions and structure***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the top of a stair railing and to be installed on the top of your surface.  This Post can either end a cable run, continue 180º or turn left or right.  

What is included in the kit?

Upper Stair Post End 

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 7 Press and Latch Cable Terminals
• 1 Pivot Flange
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post 
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

***Stairs are often specific to projects with unique dimensions and structure***

***This post requires custom work***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the bottom of a stair railing and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 7 Press and Latch Cable Tensioners
• 1 Pivot Flange
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post Assembly Drawing
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

***Stairs are often specific to projects with unique dimensions and structure***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the bottom of a stair railing and to be installed on the top of your surface..  

• 36" in height, measuring from nose to nose using Inline Design's top rail

What is included in the kit?

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 8 Press and Latch Cable Tensioners
• Square Base Cover or Round Base Cover

OR 

• For 42" total height rom the nose to nose of the stairs to the top of the handrail.  This post requires custom fabrication.

• Post: Predrilled and tapped (M8 x 1.25mm)
• 10 Press and Latch Straight Cable Tensioners
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post 
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

***Stairs are often specific to projects with unique dimensions and structure***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the middle of a stair railing and to be installed on the top of your surface. we match the angle nose to nose angle, comes stock in either 32º- 37º or 37º - 42º or we will match your angle.  

• What is included in the kit?

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 8 holes with a Diameter 5/32"
• Square Base Cover or Round Base Cover

OR 

• For 42" total height rom the nose to nose of the stairs to the top of the handrail.  This post requires custom fabrication.

• Post: Predrilled and tapped (M8 x 1.25mm)
• 8 holes with a Diameter 5/32"
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post 
• Installation Guide  
• Press and Latch Specs 

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

***Stairs are often specific to projects with unique dimensions and structure***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the top of a stair railing and to be installed on the top of your surface.  This Post can either end a cable run, continue 180º or turn left or right.  

What is included in the kit?

Upper Stair Post End 

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 8 Press and Latch Cable Terminals
• Square Base Cover or Round Base Cover

OR 

• For 42" total height rom the nose to nose of the stairs to the top of the handrail.  This post requires custom fabrication.
• Post: Pre drilled and tapped (M8 x 1.25mm)
• 10 Press and Latch Cable Terminals
• Square Base Cover or Round Base Cover

Upper Stair Post 180º, 90ºL or 90ºR

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 8 Press and Latch Cable Tensioners
• 10 Press and Latch Cable Terminals
• Square Base Cover or Round Base Cover

OR 

• For 42" total height rom the nose to nose of the stairs to the top of the handrail.  This post requires custom fabrication.

• Post: Pre drilled and tapped (M8 x 1.25mm)
• 10 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Cable Terminals
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post 
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Teminal
  • Fascia Mounting Plate

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Teminal
• Fascia Mounting Plate

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing
• Round Post  36" Assembly Drawing
• Round Post  42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 10 Press and Latch Straight Cable Tensioners
• 10 Press and Latch Straight Cable Terminals
• Fascia Inside or Outside Corner Mounting Bracket

     OR 

• For 42" total height from the surface top of the handrail.  
• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Straight Cable Terminals
• Fascia Inside or Outside Corner Mounting Bracket

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

Inside Corner

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing   
• Round Post  36" Assembly Drawing  
• Round Post  42" Assembly Drawing

Outside Corner

• Square Post 36" Assembly Drawing  
• Square Post  42" Assembly Drawing 
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing.

• Installation Guide  
• Installation Video  
• Press & Latch System Drawings 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Tensioners
  • Fascia Mounting Plate

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• Fascia Mounting Plate

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing 
• Round Post  36" Assembly Drawing
• Round Post  42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Tensioners
  • 10 Press and Latch Straight Cable Terminals
  • Square Base Cover or Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Straight Cable Terminals
• Square Base Cover or Round Base Cover

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable mid post is to be placed are required every 4' of railing and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled 
  • 10 holes with a Diameter 5/32"
  • Fascia Mounting Flange

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Pre drilled and tapped (M8 x 1.25mm)
• 12 holes with a Diameter 5/32"
• Fascia Mounting Flange

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• Center to center cable distance: 3 1/8"
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 42" Assembly Drawing
• Square Post 36" Assembly Drawing
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing
• Installation Guide 
• Press and Latch Specs

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Tensioners
  • 10 Press and Latch Straight Cable Terminals
  • Square Base Cover or Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Straight Cable Terminals
• Square Base Cover or Round Base Cover

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Terminals
  • Square Base Cover or Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Terminals
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing  
• Round Post  36" Assembly Drawing
• Round Post  42" Assembly Drawing    
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Tensioners
  • Square Base Cover
  • Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• Square Base Cover
• Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing  
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Tensioners
  • Square Base Cover
  • Round Base Cover

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• Square Base Cover
• Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing  
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

***Stairs are often specific to projects with unique dimensions and structure***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the top of a stair railing and to be installed on the top of your surface.  This Post can either end a cable run, continue 180º or turn left or right.  

What is included in the kit?

Upper Stair Post End 

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 7 Press and Latch Cable Terminals
• 1 Pivot Flange
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post 
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

***Stairs are often specific to projects with unique dimensions and structure***

***This post requires custom work***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed is the middle of a stair railing and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled
• 1 Pivot Flange
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post Assembly Drawing
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

***Stairs are often specific to projects with unique dimensions and structure***

***This post requires custom work***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the bottom of a stair railing and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 7 Press and Latch Cable Tensioners
• 1 Pivot Flange
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post Assembly Drawing
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

***Stairs are often specific to projects with unique dimensions and structure***

***This post requires custom work***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed is the middle of a stair railing and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled
• 1 Pivot Flange
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post Assembly Drawing
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

***Stairs are often specific to projects with unique dimensions and structure***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the top of a stair railing and to be installed on the top of your surface.  This Post can either end a cable run, continue 180º or turn left or right.  

What is included in the kit?

Upper Stair Post End 

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 8 Press and Latch Cable Terminals
• Square Base Cover or Round Base Cover

OR 

• For 42" total height rom the nose to nose of the stairs to the top of the handrail.  This post requires custom fabrication.
• Post: Pre drilled and tapped (M8 x 1.25mm)
• 10 Press and Latch Cable Terminals
• Square Base Cover or Round Base Cover

Upper Stair Post 180º, 90ºL or 90ºR

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 8 Press and Latch Cable Tensioners
• 10 Press and Latch Cable Terminals
• Square Base Cover or Round Base Cover

OR 

• For 42" total height rom the nose to nose of the stairs to the top of the handrail.  This post requires custom fabrication.

• Post: Pre drilled and tapped (M8 x 1.25mm)
• 10 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Cable Terminals
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post 
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

***Stairs are often specific to projects with unique dimensions and structure***

***This post requires custom work***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the bottom of a stair railing and to be installed on the top of your surface.

What is included in the kit?

• For 36" total height from the nose to nose of the stairs to the top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 7 Press and Latch Cable Tensioners
• 1 Pivot Flange
• Square Base Cover or Round Base Cover

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post Assembly Drawing
• Round Post Assembly Drawing
• Installation Guide  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement

This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
  • Post: Pre Drilled and tapped (M8 x 1.25mm) 
  • 10 Press and Latch Straight Cable Teminal
  • Fascia Mounting Plate

     OR 

• For 42" total height from the surface top of the handrail.  

• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Teminal
• Fascia Mounting Plate

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing
• Round Post  36" Assembly Drawing
• Round Post  42" Assembly Drawing 
• Installation Guide  
• Installation Video  
• Press and Latch Specs 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable extension post is to be placed as a mid post on railing runs that exceed 25' and to be installed 1" below the top of your surface.

 An extension middle post is required every 25' on a straight run,

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 10 Press and Latch Straight Cable Tensioners
• 10 Press and Latch Straight Cable Terminals
• Fascia Mounting Bracket

     OR 

• For 42" total height from the surface top of the handrail.  
• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Straight Cable Terminals
• Fascia Mounting Bracket

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing   
• Round Post  36" Assembly Drawing  
• Round Post  42" Assembly Drawing

• Installation Guide  
• Installation Video  
• Press and Latch System Drawings 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable extension post is to be placed as a mid post on railing runs that exceed 25' and to be installed 1" below the top of your surface.

 An extension middle post is required every 25' on a straight run,

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 10 Press and Latch Straight Cable Tensioners
• 10 Press and Latch Straight Cable Terminals
• Fascia Mounting Bracket

     OR 

• For 42" total height from the surface top of the handrail.  
• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Straight Cable Terminals
• Fascia Mounting Bracket

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing   
• Round Post  36" Assembly Drawing  
• Round Post  42" Assembly Drawing

• Installation Guide  
• Installation Video  
• Press and Latch System Drawings 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 10 Press and Latch Straight Cable Tensioners
• 10 Press and Latch Straight Cable Terminals
• Fascia Inside or Outside Corner Mounting Bracket

     OR 

• For 42" total height from the surface top of the handrail.  
• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Straight Cable Terminals
• Fascia Inside or Outside Corner Mounting Bracket

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

Inside Corner

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing   
• Round Post  36" Assembly Drawing  
• Round Post  42" Assembly Drawing

Outside Corner

• Square Post 36" Assembly Drawing  
• Square Post  42" Assembly Drawing 
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing.

• Installation Guide  
• Installation Video  
• Press & Latch System Drawings 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 10 Press and Latch Straight Cable Tensioners
• 10 Press and Latch Straight Cable Terminals
• Fascia Inside or Outside Corner Mounting Bracket

     OR 

• For 42" total height from the surface top of the handrail.  
• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Straight Cable Terminals
• Fascia Inside or Outside Corner Mounting Bracket

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

Inside Corner

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing   
• Round Post  36" Assembly Drawing  
• Round Post  42" Assembly Drawing

Outside Corner

• Square Post 36" Assembly Drawing  
• Square Post  42" Assembly Drawing 
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing.

• Installation Guide  
• Installation Video  
• Press & Latch System Drawings 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.

What is included in the kit?

• For 36" total height from the surface top of the handrail.  
• Post: Pre Drilled and tapped (M8 x 1.25mm) 
• 10 Press and Latch Straight Cable Tensioners
• 10 Press and Latch Straight Cable Terminals
• Fascia Inside or Outside Corner Mounting Bracket

     OR 

• For 42" total height from the surface top of the handrail.  
• Post: Predrilled and tapped (M8 x 1.25mm)
• 12 Press and Latch Straight Cable Tensioners
• 12 Press and Latch Straight Cable Terminals
• Fascia Inside or Outside Corner Mounting Bracket

Details:

• Part of the Press and Latch Series
• For Commercial or Residential
• ANSI 316 Stainless Steel
• Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

Inside Corner

• Square Post 36" Assembly Drawing
• Square Post 42" Assembly Drawing   
• Round Post  36" Assembly Drawing  
• Round Post  42" Assembly Drawing

Outside Corner

• Square Post 36" Assembly Drawing  
• Square Post  42" Assembly Drawing 
• Round Post 36" Assembly Drawing
• Round Post 42" Assembly Drawing.

• Installation Guide  
• Installation Video  
• Press & Latch System Drawings 
• Cable Tensioner/Terminal Dimensional Drawings

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options