Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.
Adult Height Requirements:
Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.
- Height from Surface 34" - 38"
- Consistent height Across Run
Children Height Requirements:
When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.
- Height from Surface Max 28"
- Vertical Clearance between handrails Min 9"
- Consistent height Across Run

Reference:
Shop our Handrail Bracket Collection
The Stainless Steel Railing Systems Virginia Round Pivot Mount Posts with Round Glass Clamps is a part of our Virginia Round style glass railing system. This system comes either with our without a handrail bracket
What is included in the kit?
GRND.PVT.STR.LOW - Lower Stair Post
- (1) Post: Pre drilled and tapped (M8 x 1.25mm)
- (2) Round Glass Clamps
GRND.PVT.STR.MID - Mid Stair Post
- (1) Post: Pre drilled and tapped (M8 x 1.25mm)
- (4) Round Glass Clamps
GRND.PVT.STR.UPP - Upper Stair Post
- (1) Post: Pre drilled and tapped (M8 x 1.25mm)
- (2) Round Glass Clamps
Details:
- Part of the Virginia Round Series
- For Commercial or Residential
-
ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
*Glass must be provided by a local vendor *
Overview
Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
This document shows anchoring options into different surface mount options. Please use this document for guidance only.
Customers are responsible to complying with their local building codes and/or architects guidelines therefore Inline Design shall, in no way be liable for any incidental or consequential damages caused. Please refer to our complete terms of sales for further information https://inlinedesign.us/terms_of_sale
Floor/Surface Mounting Flange

Floor/Surface Mount Anchoring into Concrete and Wood