Cable Railing - Round Fascia - Mid Post

FRND.PL.36.MID.EXT.018

Sale price $646.50
/
Shipping calculated at checkout.

Size
Fitting
Cable Size
Only 16 items in stock!

The Cable Railing Press And Latch System Round Fascia Mount Extension Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".

Installation Instructions:

All Installations of products offered by Inline Design must comply with local and national building codes. Inline Design provides relevant information about code compliance throughout the website, specification sheets, and instructional booklets. The information may only serve as a guide (advisory capacity) and should not be used to address building compliance issues or compliance with safety standards. Inline Design is not liable for any non-compliance that may arise from installations or improper use of company products.

Post Mounting and Placement:

Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc. For more information about local building codes, customers are encouraged to call their city specialist or contact a relevant Authority Having Jurisdiction (AHJ)

MOUNTING GUIDANCE - SURFACE MOUNT - TIP SHEET - PDF

MOUNTING GUIDANCE - FASCIA MOUNT - TIP SHEET - PDF

MOUNTING GUIDANCE - CORE MOUNT - TIP SHEET - PDF

MOUNTING GUIDANCE - WELDED MOUNT - TIP SHEET - PDF

MOUNTING GUIDANCE - PRESS AND PATCH STAIR POST PLACEMENT - TIP SHEET - PDF

Press and Latch System: 

Please make sure to read the instructions thoroughly and watch the videos for the Press and Latch system. Often our customers run into problems by skipping steps.  

PRESS AND LATCH - INSTALLATION PROCEDURE CABLE FITTINGS - TIP SHEET PL10001 - PDF

PRESS AND LATCH - CABLE TENSIONING GUIDANCE - TIP SHEET - PDF

PRESS AND LATCH - INSTALLATION SIMULATION - VIDEO 

PRESS AND LATCH - INSTALLATION -  VIDEO

Stair Installation and Post Placement:

STAIR RAILING POST PLACEMENT - GUIDANCE - TIP SHEET - PDF

End Cap and/or Tube Fittings:

Use of a metal-epoxy adhesive such as  JBWeld (epoxy glue) on the female side of tubes for fittings similar to/including end caps.

INSTALLING END CAPS & FLUSH ANGLES - TIP SHEET - PDF

Stainless Steel Maintenance and Repair:

All steel is naturally corrosive but ANSI 316 stainless contains a higher concentration of molybdenum which is what makes it so resistant to pitting and corrosion that may occur from stress, scratches or other blemishes. Although 316 is more resistant to corrosion it is not corrosion-proof unless using our passivation solution to clean the railing immediately after installation. All of our railings and components are comprised of the highest quality ANSI 316 Stainless Steel which is suitable for indoor, outdoor, and beachfront areas. 316 stainless steel is excellent for applications to close proximity saltwater because of its enhanced corrosion resistance.

The application of the passivation solution will clean and seal your new railing system. The length of time that the passivation will be effective varies based on the climate and conditions of the area. Harsher climates may require a yearly or twice yearly application whereas a more mild climate will only need a single application yearly or every few years. The application of the passivation kit is simple by spraying the railing for a period of 15-30 minutes at room temperature. After soaking, rinse the surface with clean water. The surface can then be wiped dry with a clean cloth or appropriate absorbent medium.

PASSIVATION - TIP SHEET - PDF

BUFFING AND REFINISHING YOUR STAINLESS STEEL SURFACE - TIP SHEET - PDF

REMOVING SCRATCHES AND CLEANING STAINLESS STEEL SURFACES - TIP SHEET - PDF

Feel free to contact us with any further questions.  We do appreciate your business and value your feedback on our products and services.

The cable mid post is to be placed are required every 4' of railing and to be installed 1" below the top of your surface.  The cable extension post is to be placed as a mid post on railing runs that exceed 25'.

What is included in the kit?

Cable Railing Mid Post;

  • For 36" total height from the surface top of the handrail.  
    • Post: Pre Drilled 
    • 10 holes with a Diameter 5/32"
    • Fascia Mounting Flange

     OR 

  • For 42" total height from the surface top of the handrail.  
      • Post: Pre drilled and tapped (M8 x 1.25mm)
      • 12 holes with a Diameter 5/32"
      • Fascia Mounting
      • Fascia Mounting Flange

Cable Railing Extension Post;

  • For 36" total height from the surface top of the handrail.  

OR  

  • For 42" total height from the surface top of the handrail.  

Details:

    • Part of the Press and Latch Series
    • For Commercial or Residential
    • Center to center cable distance: 3 1/8"
    • ANSI 316 Stainless Steel
    • Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

 

 


Recently viewed