Cable Railing - Round Surface - Lower Stair Post

Cable Railing - Round Surface - Lower Stair Post

TRND.PL.STR.LOW.32.018

Regular price $303.00
/
Shipping calculated at checkout.

Cable
Angle
End
Only 89 items in stock!

The Cable Railing Press And Latch System round Top Mount Bottom Stair Post is a piece of our Press And Latch cable railing system. Included in this item is: one round predrilled post with Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".

Overview

ADA Handrail height requirements are issued to create a safe enjoyable space to enjoy for everyone.  It should be noted that the ADA height of handrail requirements that will primarily be used by children.  Customers are encouraged to call their local city to get information about their local building codes. Local building codes supersede national building codes. Inline Design is providing this information in an advisory capacity only and is not liable for any code non-compliance.

Adult Height Requirements:

Top of gripping surfaces of handrails shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces. Handrails shall be at a consistent height above walking surfaces, stair nosings, and ramp surfaces.

    1. Height from Surface 34" - 38"
    2. Consistent height Across Run
Adult ADA Height Requirements guidance

Children Height Requirements:

When children are the principal users in a building or facility (e.g., elementary schools), a second set of handrails at an appropriate height can assist them and aid in preventing accidents. A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children. Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment.

    1. Height from Surface Max 28"
    2. Vertical Clearance between handrails Min 9"
    3. Consistent height Across Run
Reference:
ADA ADA Standards
OSHA Occupational Safety and Health Administration
USAB U.S. Access Board
NFPA National Fire Protection Association
DOJ Department of Justice ADA

 

Shop our Handrail Bracket Collection 

ada compliance bracket handrail guard rail

Our Flush angles and handrail tube fittings are design to have a seamless transition to our posts and and handrail tubes.  Designed for a flush fit to provide you with a simple and clean  way to join tubes together to meet meet the structural strength requirements for handrail, guardrails and ADA rails. 

Installation is quick and easy, simply glue the ends with a high strength epoxy glue (i.e. JBWeld) and insert into your tube and leave to set

Round Tubing
    • Tube Outside diameter: 1.67”
    • Tube Inside diameter: 1.57”
    • Tube thickness: 0.102"
    • Dimensional Drawing 
Square Tubing
    • Tube Outside dimensions: 1.57" x 1.57"
    • Tube Inside dimensions: 1.47” x 1.47”
    • Tube thickness: 0.102"
    • Dimensional Drawing
What is included in the kit?
    • (1) Fitting or Flush Angle or Fitting 
Details:
    • Supports ADA requirements
    • For Commercial or Residential
    • ANSI 316 Stainless Steel
    • Finish ASTM A480 No 4 linearly textured satin finish 

 

Links & Downloadable materials:

Square Fittings:

Round Fittings:

***Stairs are often specific to projects with unique dimensions and structure***

***We recommend emailing us any pictures, plans or drawings of your staircase in order to ensure you are getting exactly what you need for your project. For more information please refer to the following link: Stair Details .***

This post is designed to be placed at the bottom of a stair railing and to be installed on the top of your surface..  

  • 36" in height, measuring from nose to nose using Inline Design's top rail

What is included in the kit?

    • For 36" total height from the nose to nose of the stairs to the top of the handrail.  
    • Post: Pre Drilled and tapped (M8 x 1.25mm) 
    • 8 Press and Latch Cable Tensioners
    • Square Base Cover or Round Base Cover

OR 

    • For 42" total height rom the nose to nose of the stairs to the top of the handrail.  This post requires custom fabrication.

Details:

    • Part of the Press and Latch Series
    • For Commercial or Residential
    • ANSI 316 Stainless Steel
    • Finish ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options

Please refer to the following document for Recommended Stairs Post Placement


Recently viewed