Cable Railing - Arcadia - Fascia Mount -  MID Post

Cable Railing - Arcadia - Fascia Mount - MID Post

W.ARC.CBL.MID.36

Regular price $215.00
/
Shipping calculated at checkout.

Size
Only 3 items in stock!

The Cable Railing Press and Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing systems. This ANSI 316 Stainless Steel corner post is to be placed between corner and end posts and to be installed 1" below the edge of your surface. The stock sizes are designed for a 36" and 42" railings heights and measure 36.5" and 42.5" respectively.  Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar has to be welded.

This cable middle post is to be placed between End or Corner Posts to support the top rail for a long straight run and and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

 

What is included in the kit?

  • For 36.5" total height from the surfrace to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
    • Post: 10 Predrilled holes (5mm) [Post height without the top rail is 42 3/8"]
    • A middle post is required for every 4' cable railing

     OR 

  • For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
    • Post: 12 Predrilled holes (5mm) [Post height without the top rail is 48 5/8"]
    • A middle post is required for every 4' cable railing
  • One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)

Specifications:

    • Part of the Arcadia Series
    • For Commercial and High End Residential
    • ANSI 316 Stainless Steel Finish 
    • ASTM A480 No 4 linearly textured satin finish 

Links & Downloadable materials:

Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

Please refer to the following document for Mounting Options


Recently viewed