
New Website Launch - Winter Sale
25% Off All Products in Cart

Cable Railing - 36” Round Fascia Mount - End Post - Tensioner
WRND.PL.36.TEN.018
Regular price $232.00The Cable Railing Press And Latch System Round Fascia Mount End Post Tensioner is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- Fascia Mounting Plate
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- Fascia Mounting Plate
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Round Fascia Mount - End Post - Terminal
WRND.PL.36.TER.018
Regular price $375.00The Cable Railing Press And Latch System Round Fascia Mount End Post Terminal is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".

Cable Railing - 36” Round Fascia Mount - Extension Post
WRND.PL.36.MID.EXT.018
Regular price $555.00The Cable Railing Press And Latch System Round Fascia Mount Extension Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable extension post is to be placed as a mid post on railing runs that exceed 25' and to be installed 1" below the top of your surface.
An extension middle post is required every 25' on a straight run,
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Mounting Bracket
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Round Fascia Mount - Inside Corner Post
WRND.PL.36.CRN.I.018
Regular price $555.00The Cable Railing Press And Latch System Round Fascia Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
Details:
Links & Downloadable materials:
Inside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Outside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing.
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Round Fascia Mount - Mid Post
WRND.PL.36.MID
Regular price $182.00 Sale price $173.00 Save $9.00The Cable Railing Press And Latch System Round Fascia Mount Mid Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable mid post is to be placed are required every 4' of railing and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled
- 10 holes with a Diameter 5/32"
- Fascia Mounting Flange
OR
- For 42" total height from the surface top of the handrail.
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 12 holes with a Diameter 5/32"
- Fascia Mounting Flange
Details:
Links & Downloadable materials:
- Square Post 42" Assembly Drawing
- Square Post 36" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Press and Latch Specs
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Round Fascia Mount - Outside Corner Post
WRND.PL.36.CRN.O.018
Regular price $555.00The Cable Railing Press And Latch System Round Fascia Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
Details:
Links & Downloadable materials:
Inside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Outside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing.
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Square Fascia Mount - End Post - Tensioner
WSQU.PL.36.TEN.018
Regular price $429.00The Cable Railing Press And Latch System Square Fascia Mount End Post Tensioner is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124”.
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- Fascia Mounting Plate
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- Fascia Mounting Plate
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Square Fascia Mount - End Post - Terminal
WSQU.PL.36.TER.018
Regular price $375.00The Cable Railing Press And Latch System Square Fascia Mount End Post Terminal is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124”.
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Teminal
- Fascia Mounting Plate
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Teminal
- Fascia Mounting Plate
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Square Fascia Mount - Extension Post
WSQU.PL.36.MID.EXT.018
Regular price $555.00The Cable Railing Press And Latch System Square Fascia Mount Extension Post is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable extension post is to be placed as a mid post on railing runs that exceed 25' and to be installed 1" below the top of your surface.
An extension middle post is required every 25' on a straight run,
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Mounting Bracket
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Square Fascia Mount - Inside Corner Post
WSQU.PL.36.CRN.I.018
Regular price $555.00The Cable Railing Press And Latch System Square Fascia Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
Details:
Links & Downloadable materials:
Inside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Outside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing.
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Square Fascia Mount - Mid Post
WSQU.PL.36.MID
Regular price $198.00 Sale price $182.16 Save $15.84The Cable Railing Press And Latch System Square Fascia Mount Mid Post is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124”.
This cable mid post is to be placed are required every 4' of railing and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled
- 10 holes with a Diameter 5/32"
- Fascia Mounting Flange
OR
- For 42" total height from the surface top of the handrail.
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 12 holes with a Diameter 5/32"
- Fascia Mounting Flange
Details:
Links & Downloadable materials:
- Square Post 42" Assembly Drawing
- Square Post 36" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Press and Latch Specs
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 36” Square Fascia Mount - Outside Corner Post
WSQU.PL.36.CRN.O.018
Regular price $555.00The Cable Railing Press And Latch System Square Fascia Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Round Fascia Mount - End Post - Tensioner
WRND.PL.42.TEN.018
Regular price $483.00The Cable Railing Press And Latch System Round Fascia Mount End Post Tensioner is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- Fascia Mounting Plate
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- Fascia Mounting Plate
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Round Fascia Mount - End Post - Terminal
WRND.PL.42.TER.018
Regular price $417.00The Cable Railing Press And Latch System Round Fascia Mount End Post terminal is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Teminal
- Fascia Mounting Plate
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Teminal
- Fascia Mounting Plate
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Round Fascia Mount - Extension Post
WRND.PL.42.MID.EXT.018
Regular price $555.00The Cable Railing Press And Latch System Round Fascia Mount Extension Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable extension post is to be placed as a mid post on railing runs that exceed 25' and to be installed 1" below the top of your surface.
An extension middle post is required every 25' on a straight run,
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Mounting Bracket
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Round Fascia Mount - Inside Corner Post
WRND.PL.42.CRN.I.018
Regular price $650.00The Cable Railing Press System Round Fascia Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
Details:
Links & Downloadable materials:
Inside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Outside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing.
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Round Fascia Mount - MID Post
WRND.PL.42.MID
Regular price $198.00 Sale price $188.10 Save $9.90The Cable Railing Press And Latch System Round Fascia Mount Mid Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable mid post is to be placed are required every 4' of railing and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled
- 10 holes with a Diameter 5/32"
- Fascia Mounting Flange
OR
- For 42" total height from the surface top of the handrail.
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 12 holes with a Diameter 5/32"
- Fascia Mounting Flange
Details:
Links & Downloadable materials:
- Square Post 42" Assembly Drawing
- Square Post 36" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Press and Latch Specs
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Round Fascia Mount - Outside Corner Post
WRND.PL.42.CRN.O.018
Regular price $650.00The Cable Railing Press System Round Fascia Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Round predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post diameter is 1.67" with a thickness of 0.142".
This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
Details:
Links & Downloadable materials:
Inside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Outside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing.
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Square Fascia Mount - End Post - Tensioner
WSQU.PL.42.TEN.018
Regular price $429.00The Cable Railing Press And Latch System Square Fascia Mount End Post Tensioner is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and Tensioners. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124”.
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- Fascia Mounting Plate
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- Fascia Mounting Plate
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Square Fascia Mount - End Post - Terminal
WSQU.PL.42.TER.018
Regular price $417.00The Cable Railing Press And Latch System Square Fascia Mount End Post terminal is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed on the top of your surface..
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Teminal
- Fascia Mounting Plate
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Teminal
- Fascia Mounting Plate
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Square Fascia Mount - Extension Post
WSQU.PL.42.MID.EXT.018
Regular price $650.00The Cable Railing Press And Latch System Square Fascia Mount Extension Post is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable extension post is to be placed as a mid post on railing runs that exceed 25' and to be installed 1" below the top of your surface.
An extension middle post is required every 25' on a straight run,
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Mounting Bracket
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Square Fascia Mount - Inside Corner Post
WSQU.PL.42.CRN.I.018
Regular price $555.00The Cable Railing Press And Latch System Square Fascia Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed i" below the top of your surface.
What is included in the kit?
- For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 12 Press and Latch Straight Cable Terminals
- Fascia Inside or Outside Corner Mounting Bracket
Details:
Links & Downloadable materials:
Inside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
Outside Corner
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing.
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Square Fascia Mount - Mid Post
WSQU.PL.42.MID
Regular price $198.00 Sale price $188.10 Save $9.90The Cable Railing Press And Latch System Square Fascia Mount Mid Post is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124”.
This cable mid post is to be placed are required every 4' of railing and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled
- 10 holes with a Diameter 5/32"
- Fascia Mounting Flange
OR
- For 42" total height from the surface top of the handrail.
- Post: Pre drilled and tapped (M8 x 1.25mm)
- 12 holes with a Diameter 5/32"
- Fascia Mounting Flange
Details:
Links & Downloadable materials:
- Square Post 42" Assembly Drawing
- Square Post 36" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Press and Latch Specs
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - 42” Square Fascia Mount - Outside Corner Post
WSQU.PL.42.CRN.O.018
Regular price $555.00The Cable Railing Press And Latch System Square Fascia Mount Corner Post is a piece of our Press And Latch cable railing system. Included in this item is: one Square predrilled post and both Tensioners and Terminals. Made from ANSI 316 Stainless Steel the post comes stock in both 36" and 42" standard railing heights. Custom heights available. The post is 1.57"x1.57" with a thickness of 0.124".
This cable corner post is to be placed at the 90º corner and to be installed on the top of your surface.
What is included in the kit?
-
For 36" total height from the surface top of the handrail.
- Post: Pre Drilled and tapped (M8 x 1.25mm)
- 10 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
OR
- For 42" total height from the surface top of the handrail.
- Post: Predrilled and tapped (M8 x 1.25mm)
- 12 Press and Latch Straight Cable Tensioners
- 10 Press and Latch Straight Cable Terminals
- Square Base Cover or Round Base Cover
Details:
Links & Downloadable materials:
- Square Post 36" Assembly Drawing
- Square Post 42" Assembly Drawing
- Round Post 36" Assembly Drawing
- Round Post 42" Assembly Drawing
- Installation Guide
- Installation Video
- Press and Latch Specs
- Cable Tensioner/Terminal Dimensional Drawings
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Fascia Mount - Inside Corner Post
W.ARC.CBL.CRN.36.I.018
Regular price $639.00The Cable Railing Press and Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing systems. This ANSI 316 Stainless Steel corner post is to be placed used on a 90 degree inside corner and to be installed 1" below the edge of your surface. The stock sizes are designed for a 36" and 42" railings heights and measure 36.5" and 42.5" respectively. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar has to be welded.
This cable corner post is to be placed at the 90 degree corner of a deck or a balcony. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 10 Press and Latch Straight Cable Terminals
- 10 Press and Latch Straight Cable Tensioners
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- 12 Press and Latch Straight Cable Terminals
- 12 Press and Latch Straight Cable Tensioners
- One outside corner plate (see drawings for dimensions)
Details:
- Part of the Arcadia Series
- Designed for Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flanges L shape and Base Cover Dimensional Drawing
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Fascia Mount - MID Post
W.ARC.CBL.MID.36
Regular price $215.00The Cable Railing Press and Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing systems. This ANSI 316 Stainless Steel corner post is to be placed between corner and end posts and to be installed 1" below the edge of your surface. The stock sizes are designed for a 36" and 42" railings heights and measure 36.5" and 42.5" respectively. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar has to be welded.
This cable middle post is to be placed between End or Corner Posts to support the top rail for a long straight run and and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height from the surfrace to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: 10 Predrilled holes (5mm) [Post height without the top rail is 42 3/8"]
- A middle post is required for every 4' cable railing
OR
-
For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: 12 Predrilled holes (5mm) [Post height without the top rail is 48 5/8"]
- A middle post is required for every 4' cable railing
- One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Specifications:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel Finish
- ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.75" Post Dimensional Drawing
- Fasica Bracket Single Dimensional Drawing
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
Cable Railing - Arcadia - Fascia Mount - Outside Corner Post
W.ARC.CBL.CRN.36.O.018
Regular price $639.00The Cable Railing Press and Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing systems. This ANSI 316 Stainless Steel corner post is to be placed on an outside corner and to be installed 1" below the edge of your surface. The stock sizes are designed for a 36" and 42" railings heights and measure 36.5" and 42.5" respectively. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar has to be welded.
This cable corner post is to be placed at the 90 degree corner of a deck or a balcony. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 10 Press and Latch Straight Cable Terminals
- 10 Press and Latch Straight Cable Tensioners
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- 12 Press and Latch Straight Cable Terminals
- 12 Press and Latch Straight Cable Tensioners
- One outside corner plate (see drawings for dimensions)
Details:
- Part of the Arcadia Series
- Designed for Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flanges L shape and Base Cover Dimensional Drawing
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Fascia Mount - Tensioner
W.ARC.CBL.TEN.36.018
Regular price $407.00The Cable Railing Press And Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing system. This cable tensioners post is to be placed at the beginning or at the end of a straight run. the post come stock in both 36" and 42" post heights. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable tensioners post is to be placed at the beginning or at the end of a straight run and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 42 3/8"]
- 10 Press and Latch Straight Cable Tensioners
OR
-
For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 48 5/8"]
- 12 Press and Latch Straight Cable Tensioners
- One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Details:
- Part of the Arcadia Series
- For Commercial and High End Residential
- 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.75" Post Dimensional Drawing
- Fascia Bracket Double Dimensional Drawing
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Fascia Mount - Terminal
W.ARC.CBL.TER.36.018
Regular price $463.00The Cable Railing Press And Latch System Arcadia Fascia Mount Post is a piece of our Press And Latch cable railing system. This cable terminal post is to be placed at the beginning or at the end of a straight run. The post come stock in both 36" and 42" post heights. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable terminal post is to be placed at the beginning or at the end of a straight run and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 42 3/8"]
- 10 Press and Latch Straight Cable Terminals
OR
-
For 42.75" total height from the surface to assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 48 5/8"]
- 12 Press and Latch Straight Cable Terminals
- One fascia bracket: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Specifications:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.75" Post Dimensional Drawing
- Fascia Bracket Double Dimensional Drawing
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
- Showroom
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options
Cable Railing - Arcadia - Surface Mount - Corner Post
ARC.CBL.CRN.36.018
Regular price $507.00The Cable Railing Press and Latch System Arcadia Top Mount, Post is a piece of our Press And Latch cable railing system. This cable corner post is placed on 90º corner and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable corner post is to be placed at the 90 degree corner of a deck or a balcony. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
- For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 10 Press and Latch Straight Cable Terminals
- 10 Press and Latch Straight Cable Tensioners
OR
- For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x1.25mm) [Post height without the top rail is 41 7/8"]
- 12 Press and Latch Straight Cable Terminals
- 12 Press and Latch Straight Cable Tensioners
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flange II Shape & Base Cover Dimensional Drawings
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Surface Mount - MID
ARC.CBL.MID.36
Regular price $176.00The Cable Railing Press And Latch System Arcadia Top Mount, Post is a piece of our Press And Latch cable railing system. This cable middle post is to be placed at between the end posts and to be installed 1" below the edge of your surface. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable mid post is to be placed between end or corner post. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: 10 Predrilled holes (5mm) [Post height without the top rail is 35 7/8"]
- A middle post is required for every 5' cable railing
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: 12 Predrilled holes (5mm) [Post height without the top rail is 41 7/8"]
- A middle post is required for every 4' cable railing
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flange II Shape & Base Cover Dimensional Drawings
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Surface Mount - Tensioner
ARC.CBL.TEN.36.018
Regular price $397.00The Cable Railing Press And Latch System Arcadia Top Mount, Post is a piece of our Press And Latch cable railing system. This cable tensioners post is to be placed at the beginning or at the end of a straight run. the post come stock in both 36" and 42" post heights. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

Cable Railing - Arcadia - Surface Mount - Terminal
ARC.CBL.TER.36.018
Regular price $353.00The Cable Railing Press And Latch System Arcadia Top Mount, Post is a piece of our Press And Latch cable railing system. This cable terminal post is to be placed at the beginning or at the end of a straight run. The post come stock in both 36" and 42" post heights. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
This cable enders post is to be placed at the beginning or at the end of a straight run. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.
What is included in the kit?
-
For 36.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 35 7/8"]
- 10 Press and Latch Straight Cable Terminals
OR
-
For 42.5" total height assuming a rectangular top rail bar of size 1 3/4" x 5/8" is welded on top (see drawings)
- Post: Predrilled and tapped (M8 x 1.25mm) [Post height without the top rail is 41 7/8"]
- 12 Press and Latch Straight Cable Terminals
- One base cover
- One welded base flange
Details:
- Part of the Arcadia Series
- For Commercial and High End Residential
- ANSI 316 Stainless Steel
- Finish ASTM A480 No 4 linearly textured satin finish
Links & Downloadable materials:
- 36.5" Post Dimensional Drawing
- 42.5" Post Dimensional Drawing
- Arcadia Floor Flange II Shape & Base Cover Dimensional Drawings
- Cable Tensioner/Terminal Dimensional Drawings
- Installation Guide
Note: Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
Please refer to the following document for Mounting Options

Cable Railing - Arcadia - Surface Mount - Stair MID
ARC.CBL.MID.STR.35
Regular price $331.00The Cable Railing Press And Latch System Arcadia Stair Post System is a piece of our Press And Latch cable railing system. This Mid stair post is to be placed end post on the stairs. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.

Cable Railing - Arcadia - Surface Mount - Upper Stair 180
ARC.CBL.UPP.180.35.018
Regular price $407.00The Cable Railing Press And Latch System Arcadia Stair Post System is a piece of our Press And Latch cable railing system. This upper stair post is to be placed at the top of the stairs with the railing continuing onto straight. Unlike the other systems that we carry in stock, this system is not modular. It's tailored for Commercial and High End Residential. The top rail bar is to be welded.