Press and Latch Cable Railing System

When considering cable railing system for your deck, balcony, or stairways, the major installation time lag is in mounting the cables to the tensioners.

Traditionally installers use a crimping or swaging system to attach the cable to the end fittings. This process was time consuming and costly. And most importantly the crimping or swaging is prone to failure over time because of the cable pulling force.

With out a need for costly tooling the Press and Latch cable fittings don't can save up to 80% in installation. Each run of cable has a tensioner on one end and either a terminal or tensioner at the other end.

The Press and Latch System has been designed in a very sophisticated and contemporary look that makes it almost visually dissolving with the cables.  With the combination of our new posts in gauge 10 tubing, it is a natural progression of our line of slick and modern cable products.

Engineering drawings PDF
Instructions - Press and Latch Installation

Related Posts